Bosch Professional GBL 18V-120 Original Instructions Manual page 12

12 | English
Intended Use
The power tool is intended for blowing away non-harmful
substances (e.g. sawing debris, metal chips, stone dust,
etc.) produced during sawing, drilling or grinding. Drill holes
can also be blown out with the appropriate accessories.
The power tool is not suitable for blowing hot, flammable or
explosive materials.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch with stage selector
(2) Handle
a)
(3) Battery
(4) Air inlet
(5) Motor housing
(6) Nozzle
(7) Battery release button
(8) Recess for accessory connection
(9) Extension tube
(10) Drill hole nozzle
(11) Dust collection tube
(12) Bayonet lock
(13) Recess for dust collection tube
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless blower
Article number
No-load speed
Air speed, max.
Air volume
Weight according to
EPTA‑Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
B)
ure during operation and
during storage
Recommended rechargeable
batteries
Recommended chargers
Operating time per battery charge
– Blower level I
1 609 92A 6R6 | (19.10.2021)
Cordless blower
– Blower level II
A) Depends on battery in use
B) Limited performance at temperatures < 0 °C
Technical data determined using the battery that comes with the
product.
Noise/Vibration Information
Noise emission values determined according to
EN 62841-1.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 82 dB(A); sound power level
93 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841-1:
a
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
GBL 18V-120
This may significantly reduce vibration and noise emissions
over the total working period.
3 601 JF5 1..
Implement additional safety measures to protect the oper-
−1
min 17000
ator from the effects of vibration, such as servicing the
m/s 75
power tool and application tools, keeping their hands warm,
3
m /min 2.0
and organising workflows correctly.
A)
kg 1.4−2.4
Assembly
°C 0 to +35
u
°C –20 to +50
GBA 18V...
Battery Charging
ProCORE 18V...
GAL 18...
u
GAX 18...
GAL 36...
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
min/Ah 9
before using your tool for the first time.
(triax vector sum) and uncertainty K
h
2 2
< 2.5 m/s , K = 1.5 m/s .
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
GBL 18V-120
min/Ah 5
Bosch Power Tools