Figure 3-12: Connecting Rf Cable; Figure 3-13: Securing Sma Connector And External Antenna Installation - IEI Technology IVS-300-ULT3-i5/4G User Manual
Fanless embedded system with lnte| skylake ult/ baytrail processor, 4 gb ddr3l/ddr4, quad gbe lan with poe, on-board gps, hdmi, vga, dual ssd bay, rohs compliant,
Table of Contents
Advertisement
IVS-300 Embedded System
Figure 3-12: Connecting RF Cable
Step 8:
Remove the nut and washer from the SMA connector at the other end of the RF
cable.
Step 9:
Insert the SMA connector to the antenna connector hole on the rear panel.
Step 10:
Secure the SMA connector by inserting the washer and tightening it with nut.
Step 11:
Install the external antenna.
Figure 3-13: Securing SMA Connector and External Antenna Installation
Page 23
Advertisement
Chapters
Table of Contents
Troubleshooting
