Table of Contents
Advertisement
User Manual
Airbridge cBTS3612-450 12-carrier CDMA Base Station
3)
Whether the chip parameters of a channel board are correctly configured.
4)
Whether the daisy chain of a channel board is correct.
5)
Whether the traffic link of a channel board is correctly configured.
Confirm the above and configure correct data again.
IV. BTRM configuration data error
BTRM configuration data error may also lead to failed initialization of a base station,
therefore various parameters must be carefully checked, such as the board No., cell
No., cell resource pool No., optical interface No., ect. Of BTRM. Please confirm them
and configure correct data again.
V. Board physical connection error
That a base station fails to be initialized as a result of physical connection error may
be caused by the following:
1)
Various boards or modules have not been correctly installed and need installing
well.
2)
The optical fiber connection between BRDM and BTRM is faulty. Please refer to
"6.2 Processing of Common Board Faults".
03Q-0112-20020720-120
4 Base Station Initialization Failure Fault
4-2
Advertisement
Chapters
Table of Contents
