Table of Contents
Advertisement
Quick Links
TECHNICAL SPECIFICATIONS
Bluetooth
Output Power
Frequency
Input
Maximum Current Consumption
FM Radio Frequency
Battery Capacity
Playback Time
Charging Time
USB / SD Playback
* Playback time may vary at different volume levels.
TROUBLESHOOTING
The speaker is not working.
Check if the speaker is turned ON and the volume is adjusted properly.
Make sure that the device is paired/cable connected and the music source volumes
is not muted.
There is no power when speaker is turned ON.
Please make sure that the speaker is properly charged before use.
Can I manually enter FM channels?
Yes, you can manually enter your favourite FM channel by using number pad.
Can I record my voice and FM?
Yes, you can record your voice and FM by pressing REC button, but make sure
SD Card / USB is properly inserted.
WARRANTY STATEMENT
Amkette's Pocket Blast Bluetooth Speaker is backed by a 1 year performance warranty against any
manufacturing defects in material or workmanship from the date of original purchase. This warranty entitles
the purchaser to get the product repaired or replaced under the following conditions:
The warranty applies to the original purchaser. Proof of original purchase is required.
The warranty does not cover the damage caused by misuse, abuse or improper storage.
In no event shall Amkette be responsible for any direct, incidental, consequential or other damages of any kind.
Please contact our Technical Support Line and/or send the defective product, postage pre-paid, together
with the proof of purchase to our Customer Care Service Center to avail warranty service. Return postage
will be paid by us.
CUSTOMER CARE
Amkette House, C-64/4, Okhla Phase–II, New Delhi–110020
1800-11-9090 (Toll Free)
(9:30 AM - 6:00 PM)
For Hassle Free Service Register Your Product at www.amkette.com/register
POCKET BLAST
B l u e t o o t h S p e a k e r
User Guide
:
v5.0
:
3W + 3W (RMR)
:
100Hz—18KHz
:
DC5V
500mA
:
400mA
:
87.5 – 108Mhz
:
1500mAh
:
6 to 8 Hours*
:
2 to 3 Hours
:
MP3, WAV
+91 9312691448
(9:30 AM - 6:00 PM)
Email
techsupport@amkette.in
Advertisement
Table of Contents
Summary of Contents for Amkette POCKET BLAST
- Page 1 The warranty does not cover the damage caused by misuse, abuse or improper storage. In no event shall Amkette be responsible for any direct, incidental, consequential or other damages of any kind. Please contact our Technical Support Line and/or send the defective product, postage pre-paid, together with the proof of purchase to our Customer Care Service Center to avail warranty service.
- Page 2 BLUETOOTH PAIRING Turn the speaker ON and press the mode to switch to Bluetooth Mode. Search for ‘Amkette Pocket Blast’ on your device and Connect. The speaker will issue an indication tone after the speaker has connected successfully. Note: When the speaker is under Bluetooth mode, it will be connected to the last connected device by default.
Need help?
Do you have a question about the POCKET BLAST and is the answer not in the manual?
Questions and answers
w9rking only 10 seconds how to solve
The provided context does not contain specific troubleshooting steps for the Amkette Pocket Blast working only for 10 seconds. However, you can try the following general steps:
1. Check the Battery – Ensure the device is fully charged using a compatible charger.
2. Verify Power Source – If using a USB power source, confirm it provides sufficient power.
3. Inspect the SD Card/USB – Remove and reinsert the SD Card or USB to check if they are properly inserted.
4. Reset the Device – Turn off the speaker and restart it after a few minutes.
5. Check for Physical Damage – Ensure no visible damage affects the functionality.
6. Contact Customer Support – If the issue persists, reach out to Amkette's customer care for warranty service.
For further assistance, contact Amkette's technical support at the provided phone number or email.
This answer is automatically generated
after 10 sec system switched off
Sd card not playing in Amkette Pocket Blast
The SD card may not be playing in the Amkette Pocket Blast due to the following reasons:
1. The SD card is not properly inserted.
2. The SD card format or file type is not supported (only MP3 and WAV files are supported).
3. The SD card may be corrupted or damaged.
4. The speaker is not detecting the SD card properly—try reinserting it or using another SD card.
This answer is automatically generated
While mode can be changed to FM radio, there is no sound in the device. Can’t figure out why?
There may be no sound when using the FM radio mode on the Amkette Pocket Blast due to the following reasons:
1. The speaker may not be turned ON or the volume may be too low.
2. The device may not be properly tuned to an FM station.
3. The external antenna may not be positioned correctly for better reception.
4. If using a cable connection, ensure it is properly inserted.
5. The music source volume may be muted.
Checking these factors should help resolve the issue.
This answer is automatically generated
what charger to use for pocket blast speaker
The Amkette Pocket Blast speaker is compatible with a USB charging cable. Additionally, a USB Type-C wall charger is available for this speaker.
This answer is automatically generated