Commissioning - YASKAWA TP-smart HA1-71A41-0 Manual

Deployment

Commissioning

3.2 Commissioning
18
CAUTION!
– Before commissioning the device must be brought to room tempera-
ture.
– At condensation the device must be absolutely dry before connected
to power.
– To avoid overheat during operation the device must not be laid open
to direct sun light.
– After opening the control cabinet or desk, there are parts with pos-
sible dangerous voltage available.
– For all signal connections only screened cables are permitted.
– Signal cables must not be let within the same cable shaft as high
voltage cables.
HB160 | TP-smart | HA1-71A41-0 | en | 18-04
VIPA HMI