Operating Software; Laerdal Simulation Home; Other Applications - laerdal SimMan 3G PLUS User Manual

Operating Software

The Simulator is operated and controlled by LLEAP - Laerdal
Learning Application.

Laerdal Simulation Home

Laerdal Simulation Home is located in the Laerdal Medical
folder under the Windows start menu.
LLEAP, LLEAP Help files and other Laerdal programs related
to patient simulation are accessed through Laerdal Simulation
Home.
LLEAP
LLEAP is the instructor's application from where the simulation
session is run, controlled, and monitored. Installed on a laptop,
PC or tablet, LLEAP can be operated in Automatic or Manual
mode. Automatic mode is used for pre-programed scenarios
while Manual mode allows the instructor full manual control
over the simulation session. Running simulations in Manual
mode generally requires some medical expertise to create
clinically sound simulations.

Other Applications

The following applications are available in conjunction with the
simulation sessions:
• The Patient Monitor application emulates a typical hospital
patient monitor. It is the learner's console and can be
set up and controlled by the instructor, as well as by the
learner, through on-screen touch menus.
• Voice Conference Application (VCA) transmits all vocal
sounds used during simulation. It enables the instructor to
communicate through the simulator during the session.
• Session Viewer, SimView Server and SimView Mobile are
applications that record video and patient monitor screen
captured during simulation, in addition to providing an
interface to debrief your session. After a session is ended,
log files generated in LLEAP are transferred and merged
with the video files in Session Viewer, SimView Server,
SimCapture and SimView Mobile for the debriefing.
• License Manager for handling program licenses.
• Simulator Firmware & Network Wizard for updating the
firmware of the simulators or troubleshooting network
problems.
• SimDesigner for configuring your own pre-programed
scenarios. It can also be used to analyze and print out
a graphical representation of a scenario. SimDesigner
must be installed to allow conversion of legacy instructor
application files to LLEAP compatible file formats.
• Network Selector in Laerdal Simulation Home helps users
connect LLEAP and Patient monitor to a wireless network
and even host a network (Windows Hosted Network).
For a full overview of all applications and their help files, start
Laerdal Simulation Home.
Opening Laerdal Simulation Home