Smeg 50's Style FAB38RPB Manual page 31

Before calling after-sales service
ERROR MEA-
TYPE NING
Sensor
E01
warning
Sensor
E02
warning
Sensor
E03
warning
Sensor
E06
warning
Sensor
E07
warning
Low Power supply to
Voltage the device has
E08
War- dropped to below
ning 170 V.
Freezer
com-
Likely to occur
part-
E09 after long term
ment is
power failure.
not cold
enough
WHY
Call Service for assistance as soon as possible.
Call Service for assistance as soon as possible.
Call Service for assistance as soon as possible.
Call Service for assistance as soon as possible.
Call Service for assistance as soon as possible.
--This is not a device failure, this error helps to prevent da-
mages to the compressor.
--The voltage needs to be increased back to required levels
If this warning continues an authorised technician needs to
be contacted.
1. Set the freezer temperature to a colder value or set Super
Freeze. This should remove the error code once the required
temperature has been reached. Keep doors closed to impro-
ve time taken to reach the correct temperature.
2. Remove any products which have thawed/defrosted
during this error. They can be used within a short period
of time.
3. Do not add any fresh produce to the freezer compart-
ment until the correct temperature has been reached and
the error is no longer.
If this warning continues an authorised technician needs to
be contacted.
WHAT TO DO
67