Kenwood NEXEDGE NX-230EX Instruction Manual page 15

e PTT (Push-To-Talk) switch
Press and hold this switch, then speak into the microphone
to call a station.
f Side 1 key
Press to activate its programmable function {page 7}.
The default is Squelch Off Momentary.
g Side 2 key
Press to activate its programmable function {page 7}.
The default is Backlight.
h Keypad
Press these keys to send DTMF tones. These keys can
also be programmed with secondary functions {page 7} if a
programmable function key is programmed as "Function".
key
i
Press to activate its programmable function {page 7}.
The default is Menu.
key
j
Press to activate its programmable function {page 7}.
The default is Zone Up.
key
k
Press to activate its programmable function {page 7}.
key
l
Press to activate its programmable function {page 7}.
key
m
Press to activate its programmable function {page 7}.
The default is Zone Down.
key
n
Press to activate its programmable function {page 7}.
o Universal connector
Connect a speaker/ microphone {page 3}. Otherwise, keep
the supplied cap in place.
5