Huawei AR1200-S Series Hardware Description
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Network Router
  5. AR1200-S Series
  6. Hardware description

Huawei AR1200-S Series Hardware Description

Enterprise routers
Hide thumbs Also See for AR1200-S Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Huawei AR1200-S&2200-S Series Enterprise
Routers
V200R001C01
Hardware Description
Issue
03
Date
2012-04-20
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading

Related Manuals for Huawei AR1200-S Series

Summary of Contents for Huawei AR1200-S Series

  • Page 1 Huawei AR1200-S&2200-S Series Enterprise Routers V200R001C01 Hardware Description Issue Date 2012-04-20 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.

  • Page 3: About This Document

    Indicates a tip that may help you solve a problem or save time. Provides additional information to emphasize or supplement NOTE important points of the main text. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 4 Changes in Issue 02 (2012-03-30) Based on issue 01 (2011-12-30), this issue has the following updates: The AR2220-S model is added. Changes in Issue 01 (2011-12-30) Initial commercial release. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 5: Table Of Contents

    5.1.3 Card Dimensions.............................28 5.2 WLAN Subcard..............................29 5.2.1 Functions and Applications........................29 5.2.2 Technical Specifications..........................29 5.3 Ethernet LAN Interface Card..........................29 5.3.1 8FE1GE-8-Port 100BASE-RJ45 and 1-Port 1000BASE-RJ45 L2/L3 Ethernet Interface Card.....30 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 6 6.12 8AS Cable..............................127 6.13 3G Antenna..............................132 7 List of Indicators........................136 7.1 Indicators on the AR1200-S Panel.........................137 7.2 Indicators on the AR2220-S Panel.........................140 7.3 Power Indicators.............................142 8 List of Cards..........................145 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 7 9.8 FXS/FXO Interface Attributes........................159 9.9 ADSL2/ADSL2+/G.SHDSL Interface Attributes..................161 9.10 Attributes of the Console Interface.......................162 9.11 Attributes of the USB Interface........................162 9.12 3G Interface Attributes..........................163 9.13 VDSL Interface Attributes..........................164 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 8: Version Matching

    1.3 Matching Between Cards and Software Versions This section describes the cards supported by AR routers, including SRUs, Ethernet LAN interface cards, WAN interface cards, voice interface cards, and xDSL/xPON interface cards. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 9: Matching Between Product Models And Software Versions

    60 W AC PWR150A Power HW-100-48AC Supply Unit in an Open Rack ARV200R001C01& AR1220-S √ × × ARV200R002C00& AR1220W- √ √ × ARV200R002C01 AR2220-S × × √ Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 10: Matching Between Cards And Software Versions

    AR2220- √ √ √ √ Matching between SRUs and software versions Table 1-5 Matching between SRUs and software versions Model&Version WLAN Subcard ARV200R001C0 AR1220-S × × 1&ARV200R002 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 11 √ √ √ √ √ √ √ × × × 220- √ √ √ √ √ √ √ √ √ × × × × 200R 220- 002C Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 12 AR12 × × × × 20W-S AR22 √ √ × √ 20-S ARV200R0 AR12 × × × × 02C00&AR 20-S V200R002 AR12 × × × × 20W-S Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 13 √ √ √ √ × ARV2 AR122 √ √ √ √ √ 00R00 2C01 AR122 √ √ √ √ √ 0W-S AR222 √ √ √ √ √ Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 14: Chassis

    This section describes the naming conventions used when naming AR routers. 2.3 Device Structure This section describes the structure of the AR routers. 2.4 System Configuration 2.5 Physical Specifications Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 15: Introduction

    This section briefly describes the AR routers and the models available. Description Huawei AR Enterprise Router (AR router for short) are the next-generation routers integrating data,voice, security, routing, switching, and virtual private network (VPN) functions. As an egress gateway for enterprises, the AR routers use the multi-core CPU processing capabilities and rapid expansibility.

  • Page 16: Device Structure

    This section describes the structure of the AR routers. 2.3.1 AR1200-S Series This section describes the structure of the AR1200-S. Appearance Figure 2-2 Figure 2-3 show front views of AR1200-S. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 17 Hardware Description 2 Chassis Figure 2-2 AR1220-S front view Figure 2-3 AR1220W-S front view Figure 2-4 Figure 2-5 show rear views of AR1200-S. Figure 2-4 AR1220-S rear view Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 18 Slots can be combined into one, but one slot cannot be divided into multiple slots. l After two slots are combined into one, the slot ID is the larger number of the two original slots. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 19: Ar2200-S Series

    Figure 2-7 AR2220-S front view 14 15 Figure 2-8 show rear views of AR2200-S. Figure 2-8 AR2220-S rear view 1: Pluggable card 2: ESD jack 3: Ground screw 4: AC jack Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 20 – Slot 3 and slot 4 are combined into new slot 4. – New slot 2 and slot 5 are combined into new slot 5. – New slot 4 and slot 6 are combined into new slot 6. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 21: System Configuration

    AR1200-S: 2.90 kg (6.39 lb) l AR2220-S: 4.95 kg (10.91 lb) Operating temperature 0°C to 40°C (0°F to 104°F) Relative humidity 5% RH to 90% RH, non-condensing Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 22 Below 4000 m (13123.2 ft.) AC input Rated voltage 100 V AC to 240 V AC, 50/60Hz voltage Maximum voltage 85 V AC to 264 V AC, 47/63Hz Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 23: Power Supply Units

    This section illustrates the connection between each power supply unit and the motherboard. 3.3 HW-100-48AC14D This section describes the HW-100-48AC14D power supply unit, including the naming convention, functions, appearance, and technical specifications. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 24: Power Supply Configuration

    This section illustrates the connection between each power supply unit and the motherboard. 3.2.1 Single Non-PoE AC Power Supply Unit Figure 3-1 shows the layout of single non-PoE AC power supply unit connection to motherboard. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 25: Single Non-Poe + Poe Ac Power Supply Unit

    PoE AC power supply unit: After the AC power is transmitted to the PoE module, the PoE module outputs -53 V voltage, and then the PSE on the SRU provides power for the powered devices (PDs) connected to the PoE interface. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 26: Hw-100-48Ac14D

    The HW-100-48AC14D uses 90 V AC-264 V AC input power, and provide 48 V/100 W output power when no fan is used. Table 3-2 describes the protection functions provided by the HW-100-48AC14D. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 27 No smoke will be generated. Temperature is reduced below 55°C (131°F). Appearance Figure 3-4 shows the appearance of the HW-100-48AC14D. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 28 AC input voltage 90 V AC to 264 V AC; typical: 110 V AC/220 V AC AC input 47 Hz to 63 Hz; typical: 50 Hz/60 Hz frequency Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 29 Rated output 48 V voltage Output power 100 W Operating 0°C to 40°C (0°F to 104°F) temperature Humidity 20% RH to 80% RH Altitude 4000 m (13123.2 ft.) Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 30: Heat Dissipation System

    – The fan module dimensions of the AR2220-S are 40 mm [1.58 in.] (width) x 20 mm [0.79 in.] (depth). 4.1 Heat Dissipation Process The AR routers heat dissipation system uses fans to create a left-to-right air channel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 31: Heat Dissipation Process

    AR1200-S chassis. Figure 4-1 Air circulation through the AR1200-S chassis Figure 4-2 shows air circulation through the AR2220-S chassis. Figure 4-2 Air circulation through the AR2220-S chassis Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 32: Cards

    5.6 xDSL Interface Card This section describes the types, functions, applications, appearance, interfaces, and technical specifications of the xDSL/xPON interface card. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 33: Introduction

    Figure 5-1 Relationships between cards on the AR1200-S Service card Backplane Service card Power Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 34: Interface Numbering

    0. – There are two rows of interfaces on the interface card. These interfaces are numbered from bottom to top and left to right starting with 0. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 35: Card Dimensions

    Height: the height of the ejector lever Figure 5-4 shows the cards supported by the AR routers and Table 5-1 lists the card dimensions. Figure 5-4 Card appearances WSIC XSIC Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 36: Wlan Subcard

    Maximum power 7.24 W consumption 5.3 Ethernet LAN Interface Card This section describes the types, functions, applications, appearance, interfaces, and technical specifications of the Ethernet LAN interface card. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 37: 8Fe1Ge-8-Port 100Base-Rj45 And 1-Port 1000Base-Rj45 L2/L3 Ethernet Interface Card

    8FE1GE. Figure 5-5 Appearance of the 8FE1GE Buttons and Indicators on the Panel Table 5-3 describes the buttons and indicators on the 8FE1GE panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 38 FE electrical TX electrical interfaces to transmit and interface receive FE services. 1000BASE-T The 8FE1GE provides one electrical GE electrical interface to interface transmit and receive GE services. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 39 MDIX interfaces are usually used on hubs or LAN switches. Standards IEEE802.3, IEEE802.3u, IEEE802.3ab compliance Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network layer protocol Technical Specifications Table 5-7 describes the technical specifications of the 8FE1GE. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 40: 24Ge-24-Port 1000Base-Rj45 L2/L3 Ethernet Interface Card

    The 24GE can be installed into the XSIC slot on the AR2220-S. On the AR2220-S, two WSIC slots are combined into one XSIC slot. Panel and Interfaces Figure 5-6 shows the appearance of the 24GE. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 41 If the indicator is off, the link is not connected. Interfaces Table 5-9 describes the types and functions of interfaces on the 24GE. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 42 223.50 mm x 201.00 mm x 40.14 mm (8.8 in. x 7.92 in. x 1.58 in.) (depth x width x height) Maximum power 25 W consumption Weight 0.85 kg (1.88 lb) Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 43: Wan Interface Card

    1GEC panel. Figure 5-7 Appearance of the 1GEC panel Buttons and Indicators on the Panel Table 5-12 describes the buttons and indicators on the 1GEC panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 44 If the indicator is off, no data is being transmitted or received. Interfaces Table 5-13 describes the types and functions of interface on the 1GEC. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 45 Table 5-15 Attributes of the SFP optical module (100/1000 Mbit/s) supported by the GE optical interface Attri Description bute Tran 500 m 10 km 10 km (single- 40 km 40 km 80 km 100 km smiss mode bidirectional fiber) dista Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 46 223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.) (depth x width x height) Maximum power 2.28 W consumption Weight 0.25 kg (0.55 lb) Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 47: 2Fe-2-Port-Fe Wan Interface Card

    2FE. Figure 5-8 Appearance of the 2FE Buttons and Indicators on the Panel Table 5-17 describes the buttons and indicators on the 2FE panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 48 Table 5-18 Types and functions of interfaces on the 2FE Letter Name Description Cable Type ntit Figure FE electrical The 2FE provides two FE 6.5 Network interface electrical interfaces to transmit Cable and receive FE services. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 49: 1E1T1-M/2E1T1-M-1/2 Port-Channelized E1/T1/Pri/Ve1 Multifunctional Interface Card

    The 1E1T1-M/2E1T1-M is the E1/T1/PRI/VE1 processing unit on the AR routers and provides one or two E1/T1/PRI/VE1 interfaces. Primary Rate Interface (PRI) indicates ISDN primary rate interfaces. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 50 Provides the ISDN PRI function. Applications 1E1T1-M/2E1T1-M(SIC) can be installed into the SIC slot of the AR1200-S and AR2220-S. 2E1T1-M(WSIC) is installed in a WSIC or XSIC slot on the AR2220-S. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 51 2E1T1-M (WSIC). Figure 5-11 Appearance of the 2E1T1-M (WSIC) Buttons and Indicators on the Panel Table 5-23 describes the buttons and indicators on the 1E1T1-M/2E1T1-M panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 52 Description Cable Type Figure 5-9, Figure 5-10, Figure 5-11 1E1T1-M: 1 75-ohm or 120- 6.7 E1/T1 Trunk Cables ohm E1 cable or 2E1T1-M: 2 100-ohm T1 cable Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 53 T1 100-ohm coaxial cable Working mode CT1, ISDN PRI, or VT1 Function Backup Terminal access ISDN PRI Technical Specifications Table 5-27 describes the technical specifications of the 1E1T1-M/2E1T1-M. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 54: 1E1T1-F/2E1T1-F (1/2-Port-Fractional Channelized E1/T1 Wan Interface Card)

    2E1T1-F Functions and Applications Functions The 1E1T1-F/2E1T1-F sends, receives, and processes E1/T1 data traffic. Table 5-29 describes the differences in functions provided by the 1E1T1-F/2E1T1-F and 1E1T1-M/2E1T1-M. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 55 1E1T1-F/2E1T1-F. Interface Attributes Table 5-30 Attributes of unchannelized E1 interfaces Attribute Description Connector type Standards G.703 or G.704 compliance Transmission rate 2.048 Mbit/s Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 56 223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.) (depth x width x height) Maximum power consumption Weight 0.3 kg (0.66 lb) Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 57: 1Sa/2Sa-1/2-Port-Synchronous/Asynchronous Wan Interface Card

    The 1SA/2SA is hot swappable. Applications 1SA/2SA can be installed into the SIC slot of the AR1200-S, and AR2220-S. Panel and Interfaces Figure 5-12 shows the appearance of the 1SA. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 58 If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 59 5-13 DB28 1SA: 1 The synchronous/ 6.8 Synchronous/ asynchronous serial Asynchronous Serial 2SA: 2 interface cable is Interface Cables selected according to attributes of the connected line. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 60 DDN leased line l Modem dial-up l Backup Terminal access l Asynchronous leased line l Terminal access Technical Specifications Table 5-37 describes the technical specifications of the 1SA/2SA. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 61: 8As (8-Port-Asynchronous Wan Interface Card)

    The 8AS is installed into the WSIC slot of the AR1200-S and AR2220-S. On the AR1200-S, a WSIC slot consists of two SIC slots. Panel and Interfaces Figure 5-14 shows the appearance of the 8AS panel. Figure 5-14 Appearance of the 8AS panel Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 62 Letter Name Quant Description Cable Type Figure 5-14 RJ45 Interfaces on the 8AS send, 6.12 8AS Cable receive, and process asynchronous data traffic using customized RJ45 cables. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 63: 1Bst (1-Port-Isdn S/T Wan Interface Card)

    The 1BST is the ISDN module on the AR routers and provides one ISDN S/T interface, which transmits data services. The 1BST transmits, receives, and processes 1-channel ISDN BRI S/T data flow. Functions and Applications Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 64 If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 65 Interface Attributes Table 5-44 ISDN S/T interface attributes Item Description Connector RJ45 Standards compliance ITU-T I.430, Q.921, Q.931 Rate 192 kbit/s Bandwidth 0 to 100 MHz Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 66: 1Cpos-155M (1-Port Channelized Pos Interface Card)

    Supports clear channel (unframed) E1, non-channelized (framed) E1, and channelized CE1. Supports non-channelized (framed) T1 and channelized CT1. Supports the link layer protocols such as HDLC and PPP and a maximum of 1024 HDLC channels. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 67 Hz), the system is powering on or restarting. If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 68 Interface Attributes Table 5-48 CPOS interface attributes Attribute Description Connector type LC/PC Optical interface Depending on the SFP optical module attribute Standards STM-1 compliance Frame format SDH/SONET Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 69: Hspa+7 (3G Wan Interface Card)

    12 W consumption Weight 0.3 kg (0.66 lb) 5.4.9 3G-HSPA+7 (3G WAN Interface Card) A 3G-HSPA+7 interface card provides two 3G antenna interfaces and one mini USB interface. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 70 The 3G-HSPA+7 interface card can be installed in the SIC slot on the AR1200-S and AR2220- S chassis. Panel and Interfaces Figure 5-17 shows the appearance of the 3G-HSPA+7 interface card. Figure 5-17 3G-HSPA+7 panel Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 71 If the indicator blinks once every 2s (0.5 Hz), the 2G signals strength is low. If the indicator blinks once every 0.25s (4 Hz), the 2G signals strength is medium. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 72 SMA RF: connects to an antenna to provide wireless access. mini USB: connects to a USB flash drive with third-party wireless network test software, for example, Qualcomm CAIT. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 73 Table 5-54 Technical specifications of the 3G-HSPA+7 Parameter Description Dimensions (W x 100.1 mm x 223.5 mm x 19.82 mm D x H) Maximum power consumption Weight 0.2 kg Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 74: 4Gew-T (4-Port-Ge Electrical Wan Interface Card)

    4GEW-T interface card. Figure 5-18 4GEW-T panel Buttons and Indicators on the Panel Table 5-55 describes the buttons and indicators on the 4GEW-T panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 75 Figur 5-18 1000BA The 4GEW-T interface card provides four 6.5 Network SE-T 1000M electrical interfaces to transmit and Cable electrica receive GE data traffic. interface Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 76: 4Gew-S

    5.4.11 4GEW-S (4-Port-GE Optical WAN Interface Card The 4GEW-S interface card provides four GE optical interfaces. 4GEW-S stands for: 4: four interfaces GE: 1000M Ethernet W: WAN S: optical interface Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 77 4GEW-S interface card. Figure 5-19 4GEW-S panel Buttons and Indicators on the Panel Table 5-59 describes the buttons and indicators on the 4GEW-S panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 78 Figur 5-19 1000BA The 4GEW-S interface card provides four GE 6.6 Optical SE-X optical interfaces to transmit and receive GE Fiber optical service traffic. interface Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 79 5 -2.5 -3.0 -3.0 -3.0 0 dBm 0 dBm powe Rece -17.0 -20.0 -19.5 -19.5 -23.0 -30.0 iver sensi tivity Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 80: Voice Interface Card

    B channel: provides 64 kbit/s bandwidth and transmits voice service. D channel: is a signaling channel and provides 16 kbit/s bandwidth. The total bandwidth of two B channels and one D channel is 144 kbit/s. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 81 CPLD logic module: provides the working clock and reset signals for the chip, controls the line -40 V feed, controls the service port status, and monitors the board clock. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 82 2BST (WSIC). Figure 5-21 Appearance of the 2BST (WSIC) panel Buttons and Indicators on the Panel Table 5-66 describes the buttons and indicators on the 2BST panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 83 Table 5-67 Types and functions of interfaces on the 2BST Letter in Name Quantity Description Cable Type Figure 5-20, Figure 5-21 RJ45 ISDN S/T interfaces are 6.10 ISDN-ST Cables provided. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 84: 4Fxs1Fxo-4-Port Fxs And 1-Port Fxo Voice Interface Card

    An FXO interface is a loop trunk interface and provides access to the telephone exchange by using regular subscriber lines. Functions and Applications Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 85 If the indicator is off, the software is not running or is being reset. ACT (interface Green If the indicator is steady on, the FXO status channel is being occupied by a call. indicator) Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 86 ITU K.20 for protection against overcurrent and overvoltage Cable type Regular telephone line Dialing mode DTMF in accordance with GB3378 Pulse dialing Bandwidth 300 Hz to 3400 Hz Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 87: 16/32/64/128-Channel Dsp Module

    Only the DSP module supported by the product can be inserted into the DSP DIMM slot. The DDR3 memory board or unsupported DIMMs cannot be inserted; otherwise, the device may be damaged or does not function properly. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 88: Xdsl Interface Card

    Annex A is applied to ADSL over POTS and compatible with POTS services. Annex B Annex B is applied to ADSL over ISDN and compatible with ISDN services. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 89 The ADSL-A/M and ADSL-B panels are identical except for having different silkscreens. The following describes the panel and Interfaces of the ADSL-A/M. Figure 5-23 shows the appearance of the ADSL-A/M. Figure 5-23 Appearance of the ADSL-A/M Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 90 Table 5-77 Types and functions of interfaces on the ADSL-A/M Letter in Name Quanti Description Cable Type Figure 5-23 ADSL2+ The ADSL-A/M 6.11 Regular Telephone (RJ11) provides one RJ11 Lines interface, which supports regular telephone lines. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 91 223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.) (Depth x Width x Height) Maximum power 5.4 W consumption Weight 0.3 kg (0.66 lb) Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 92: Shdsl-1-Port-4-Channel G.shdsl Wan Interface Card

    4G.SHDSL. Figure 5-24 Appearance of the 4G.SHDSL Buttons and Indicators on the Panel Table 5-80 describes the buttons and indicators on the 4G.SHDSL panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 93 If the indicator is off, no data is being transmitted or received. Interfaces Table 5-81 describes the types and functions of interfaces on the 4G.SHDSL. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 94: 1Pon (1-Port Gpon/Epon Dual-Mode Interface Card)

    8.2 W consumption Weight 0.35 kg (0.78 lb) 5.6.3 1PON (1-Port GPON/EPON Dual-Mode Interface Card) The 1PON card is the EPON/GPON auto-sensing module on the AR routers. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 95 1PON panel. Figure 5-25 Appearance of the 1PON panel Buttons and Indicators on the Panel Table 5-84 describes the buttons and indicators on the 1PON panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 96 Table 5-85 Types and functions of interfaces on the 1PON card Letter in Name Description Cable Type Figure 5-25 ntity The 1PON card provides 6.6 Optical Fiber interface EPON/GPON interfaces that are connected using SC/PC fibers. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 97 Table 5-87 Technical specifications of the 1PON card Item Specification Dimensions 223.5 mm x 100.1 mm x 19.82 mm (depth x width x height) Maximum power 8.72 W consumption Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 98: Vdsl (1-Port Vdsl2 Over Pots Wan Interface Card)

    The VDSL interface card can be installed in the SIC slot on the AR1200-S and AR2220-S chassis. Panel and Interfaces Figure 5-26 shows the appearance of the VDSL interface card. Figure 5-26 VDSL panel Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 99 If the indicator blinks once every 0.25s (4 Hz), the VDSL channel is being activated. Interfaces Table 5-89 describes the types and functions of interfaces on the VDSL interface card. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 100 VDSL interface card. Table 5-91 Technical specifications of the VDSL interface card Parameter Description Dimensions (W x 100.1 mm x 223.5 mm x 19.82 mm D x H) Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 101 Huawei AR1200-S&2200-S Series Enterprise Routers Hardware Description 5 Cards Parameter Description Maximum power 7.6 W consumption Weight 0.2 kg Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 102: Cables

    This section describes the structure and technical specifications of the 4G.SHDSL cable. 6.10 ISDN-ST Cables This section describes the categories, structure, and technical specifications of the ISDN-ST cable. 6.11 Regular Telephone Lines Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 103 An 8AS cable is connected to an 8AS interface card to commission or maintain the 8AS interface card. 6.13 3G Antenna A 3G antenna transmits and receives 3G signals to enable an AR router to communicate with a 3G network. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 104: Ac Power Cable

    AC power cable. Table 6-1 Specifications of the AC power cable Item Description Cable type External power cable Function 250 V AC/10 A complying with international standard Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 105: Dc Power Cables

    -48 V DC power cable is connected to the NEG(-) end of the DC power supply. Appearance and Structure The black -48 V DC power return wire and the blue -48 V DC power cable are shown in Figure Figure 6-3. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 106 Specifications The technical specifications of a -48 V DC power return wire and a -48 V DC power cable are the same, as described in Table 6-2. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 107: Ground Cable

    Appearance Figure 6-4 shows the appearance of the ground cable. Figure 6-4 Appearance of the ground cable Specifications Table 6-3 lists the specifications of the ground cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 108: Console Cable

    Figure 6-5 Structure of the console cable D-type connector (9-pin, male) Network port connector Label (8-pin, RJ-45) Pos.5 Pos.9 Pos.6 Pos.1 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 109: Network Cable

    A network cable connects a maintenance terminal to the console port on the main control board for local or remote maintenance. The network cables are classified into straight-through cables and crossover cables. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 111 To achieve the optimum electrical transmission performance, ensure that the wires connected to pins 1 and 2 and to pins 3 and 6 are twisted pairs. Specifications Table 6-8 lists the specifications of the network cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 112: Optical Fiber

    The optical interface on a board The optical distribution frame (ODF) or the optical interface on another device Table 6-9 lists the classification of optical fibers. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 113 To remove the fiber, press the latch on the connector and pull the fiber out. Figure 6-8 Figure 6-9 show the appearances of the single mode fiber. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 114 6 Cables Figure 6-8 Single mode fiber with LC/PC connectors Figure 6-9 Single mode fiber with SC/PC connectors Figure 6-10 shows the appearance of the multimode fiber. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 115 Fiber Selection Criterion Table 6-11 lists the criteria for selecting optical fibers. Table 6-12 lists common optical connectors. Table 6-11 Fiber selection criterion Parameter Criterion Length Onsite survey result Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 116: E1/T1 Trunk Cables

    The connectors of the cables are as follows: 75-ohm unbalanced coaxial cable (DB9 to BNC): – One end provides a DB9 connector. – The other end provides two BNC connectors. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 117 E1 120-ohm or T1 100-ohm balanced twisted pair cable. Figure 6-12 Appearance of the E1 120-ohm or T1 100-ohm balanced twisted pair cable Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 118 E1 75-ohm unbalanced coaxial cable. Table 6-13 Pin assignments of an E1 75-ohm unbalanced coaxial cable Connector X1 (DB9) BNC Connector Pin assignment Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 119 Rx end is connected to the Tx end. Figure 6-15 E1 75-ohm unbalanced coaxial cable extension connector E1 75-ohm Coaxial E1 75-ohm unbalanced connector cable extension coaxial cable Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 120 PANTONE 430U Diameter l E1 75-ohm unbalanced coaxial cable: 0.254 mm (0.01 in.) l E1 120-ohm or T1 100-ohm balanced twisted pair cable: 0.4 mm (0.016 in.) Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 121: Synchronous/Asynchronous Serial Interface Cables

    Table 6-16 Categories of synchronous/asynchronous serial interface cables Cable Local End Connector Network-side Connector V.24 DTE cable DB28 connector DB25 (male) connector V.24 DCE cable DB25 (female) connector V.35 DTE cable DB28 (male) connector Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 122 Figure 6-17 shows the appearance of the V.24 DTE cable. Figure 6-17 Appearance of the V.24 DTE cable Figure 6-18 shows the appearance of the V.24 DCE cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 123 Figure 6-19 shows the appearance of the V.35 DTE cable. Figure 6-19 Appearance of the V.35 DTE cable Figure 6-20 shows the appearance of the V.35 DCE cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 124 Figure 6-21 shows the appearance of the X.21 DTE cable. Figure 6-21 Appearance of the X.21 DTE cable Figure 6-22 shows the appearance of the RS449 DTE cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 125 6 Cables Figure 6-22 Appearance of the RS449 DTE cable Figure 6-23 shows the appearance of the RS449 DCE cable. Figure 6-23 Appearance of the RS449 DCE cable Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 126 RS530 DCE cable. Figure 6-25 Appearance of the RS530 DCE cable Specifications Table 6-17 lists the specifications of the synchronous/asynchronous serial interface cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 127: Shdsl Cables

    The connectors of a 4G.SHDSL cable are as follows: Four RJ11 connectors on the local end An RJ45 connector on the network side Appearance and Structure Figure 6-26 shows the appearance of the 4G.SHDSL cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 128 Label 1 Network port connector Label 2 (8-pin, RJ-45) Main Label Label 3 Label 4 Pin Assignments Table 6-18 describes the pin assignments of the 4G.SHDSL cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 129: Isdn-St Cables

    8 pins 6.10 ISDN-ST Cables This section describes the categories, structure, and technical specifications of the ISDN-ST cable. Introduction ISDN-ST cables are classified into the following types: Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 131 6 are the sending end, and pins 4 and 5 are the receiving end. Table 6-20 Pin assignments of the standard ISDN S/T interface cable RJ45 Signal RJ45 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 132 Table 6-22 Technical specifications of an ISDN-ST cable Item Specification Characteristic impedance 100 ohm Cable Category 5 twisted pairs Color PANTONE 430U Diameter 0.51 mm (0.02 in.) Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 133: Regular Telephone Lines

    Table 6-23 Pin assignment of a regular telephone line X1 Pin Wire Color X2 Pin Remarks Tip(+) Green Ring(-) Specifications Table 6-24 lists the specifications of the regular telephone line. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 134: 8As Cable

    The common usage scenarios of 8AS cables are: To connect an 8AS interface card to automatic teller machines in a bank, use shield straight- through cables. You can buy shield straight-through cables from Huawei or made these cables onsite. To connect an 8AS interface card to a dumb terminal, use a transit cable and a shield straight-through cable.
  • Page 136 Transit Cable Figure 6-34 shows the appearance of a transit cable. Figure 6-34 Transit cable appearance Figure 6-35 shows the structure of a transit cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 137 Core diameter of the inner conductor 0.51 mm Wire gauge of the inner conductor 24 AWG DC resistance of the inner conductor 93.8 ohm Number of pins Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 138 Pos.13 Pos.9 Pos.5 D-type connector (9-pin, male) Table 6-28 lists the pin assignments of an asynchronous serial cable. Table 6-28 Pin assignments of an asynchronous serial cable Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 139: Antenna

    A 3G antenna transmits and receives 3G signals to enable an AR router to communicate with a 3G network. Introduction The antenna interfaces on a 3G-HSPA+7 interface card can connect to whip antennas and indoor remote antennas. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 140 Color Black Characteristic impedance 50 ohm Length 150 mm Frequency 824 MHz to 960 MHz/1710 MHz to 2170 Maximum power 10 W Operating temperature -40°C to +70°C Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 141 < 3 Remote Antenna Figure 6-39 shows the appearance of a remote antenna. Figure 6-39 Remote antenna Table 6-31 lists the technical specifications of a remote antenna. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 142 1710 MHz to 2170 MHz: 2.5 dBi Voltage standing wave ratio < 2.5 Attenuation < 0.3 dB on each meter of feed line (within the working frequency band) Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 143: List Of Indicators

    This section describes the indicators on the AR1200-S panel. 7.2 Indicators on the AR2220-S Panel This section describes the indicators on the AR2220-S panel. 7.3 Power Indicators This section describes the power indicators. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 144: Indicators On The Ar1200-S Panel

    If the indicator is off, the software is not running or is being reset. Green If the indicator is steady on, at least one GE interface has been connected or activated. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 145 If the indicator is off, the link is not connected or activated. WLAN The button enables and disables the WLAN function. Figure 7-2 shows the indicators on the AR1220W-S rear panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 146 If the indicator is steady on, the port interface) is used as a MiniUSB port. If the indicator is off, the port does not function as a MiniUSB port. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 147: Indicators On The Ar2220-S Panel

    The fault needs to be rectified manually. If the indicator is off, the software is not running or is being reset. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 148 USB disk. If the indicator is off, the USB disk is not inserted, the USB interface fails, or the indicator fails. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 149: Power Indicators

    Resetting the device will cause service interruption; therefore, confirm the action before you reset the device. 7.3 Power Indicators This section describes the power indicators. HW-100-48AC14D Figure 7-4 shows the indicator of the HW-100-48AC14D. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 150 Indicator Table 7-5 Description of the PWR150A indicators Indicator Color Description Power indicator Green If the indicator is steady on, the power supply (STATUS) unit functions properly. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 151 If the indicator is off, the input power is out of range, for example no AC input, overvoltage, and undervoltage, or the output power is out of range, for example, undervoltage and overtemperature. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 152: List Of Cards

    WAN interface cards, voice interface cards, and xDSL/xPON interface cards. 8.2 Power Consumption and Weight This section describes the power consumption and weight of cards supported by the AR routers. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 153: Cards Supported By The Ar

    Table 8-3 Matching between Ethernet LAN interface cards and software versions Model&Version 8FE1GE 24GE ARV200R001C0 AR1220-S √ × 1&ARV200R002 AR1220W-S √ × C00&ARV200R 002C01 AR2220-S √ √ Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 154 √ √ √ √ √ √ √ √ √ × √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ 220- Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 155 √ √ √ × × ARV2 AR122 √ √ √ √ × 00R00 2C00 AR122 √ √ √ √ × 0W-S AR222 √ √ √ √ × Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 156: Power Consumption And Weight

    16.8 W 0.3 kg (0.67 lb) 4FXS1FXO 12.78 W 0.3 kg (0.67 lb) ADSL-A/M 5.4 W 0.3 kg (0.67 lb) ADSL-B 4G.SHDSL 8.2 W 0.35 kg (0.77 lb) Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 157: List Of Interface Attributes

    9.11 Attributes of the USB Interface This section describes the attributes of the USB interface. 9.12 3G Interface Attributes This section describes the attributes of 3G interfaces. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 158 Huawei AR1200-S&2200-S Series Enterprise Routers Hardware Description 9 List of Interface Attributes 9.13 VDSL Interface Attributes This section describes the attributes of the VDSL interface. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 159: Electrical Interfaces

    The interfaces of most network cards are medium dependent interfaces (MDIs). l MDIX interfaces are usually used on hubs or LAN switches. Standards IEEE802.3, IEEE802.3u, IEEE802.3ab compliance Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network layer protocol Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 160: Ge/Pon Optical Interface Attributes

    0 dBm smitt dBm to dBm to dBm to dBm to dBm to dBm to dBm to to 5 -2.5 -3.0 -3.0 -3.0 0 dBm 0 dBm powe Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 161 Average turn-off -45 dBm optical power Side-mode 30 dB suppression ratio Extinction ratio 10 dB to 15 dB Receivin Overload power -8 dBm g end Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 162: Cpos Interface Attributes

    -3.0 dBm to 0 g power -14.0 dBm Receiver -28.0 dBm -23.0 dBm -23.0 dBm -32.98 dBm sensitivity Overload -14.0 dBm -10.17 dBm -8.0 dBm -8.0 dBm optical power Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 163: E1 Interface Attributes

    Connector type Standards G.703 or G.704 compliance Transmission rate 2.048 Mbit/s Cable type E1 75-ohm unbalanced coaxial cable E1 120-ohm balanced twisted pair cable E1 trunk cable extension Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 164: T1 Interface Attributes

    Attribute Description Connector type Standards G.703 or G.704 compliance Transmission rate 1.544 Mbit/s Cable type T1 100-ohm coaxial cable Working mode Unchannelized T1 Function Backup Terminal access Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 165: Synchronous/Asynchronous Serial Interface Attributes

    RS449 DCE cable l RS530 DTE cable l RS530 DCE cable Function DDN leased line l Modem dial-up l Backup Terminal access l Asynchronous leased line l Terminal access Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 166: Isdn S/T Interface Attributes

    NT: ISDN S/T interface crossover cables 9.8 FXS/FXO Interface Attributes This section describes the attributes of FXS/FXO interfaces. Table 9-15 describes the attributes of FXS/FXO (RJ11) interfaces on the 4FXS1FXO. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 167 Standards compliance ITU Q.552 for FXO interfaces ITU K.20 for protection against overcurrent and overvoltage Cable type Telephone cable Dialing mode DTMF in accordance with GB3378 Pulse dialing Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 168: Adsl2/Adsl2+/G.shdsl Interface Attributes

    A downstream transmission rate of 8 Mbit/s and an upstream transmission rate of 1024 kbit/s Cable type Regular telephone line Table 9-19 describes the attributes of G.SHDSL interfaces. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 169: Attributes Of The Console Interface

    Operating mode Device 9.11 Attributes of the USB Interface This section describes the attributes of the USB interface. Table 9-22 lists the attributes of the USB-A interface. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 170: Interface Attributes

    Downstream (Rx): 384 kbit/s HSPA: l Upstream (Tx): 5.76 Mbit/s l Downstream (Rx): 14.4 Mbit/s HSPA+: l Upstream (Tx): 5.76 Mbit/s l Downstream (Rx): 21 Mbit/s Network protocol WCDMA/HSPA/GPRS/EDGE Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 171: Vdsl Interface Attributes

    ADSL full rate mode (ITU-T 992.1 G.DMT): a downstream transmission rate of 8 Mbit/s and an upstream transmission rate of 1 Mbit/s Cable type Telephone cable Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

This manual is also suitable for:

Ar2200-s seriesAr1220-sAr1220w-sAr2220-s

Table of Contents