Table of Contents
Advertisement
Item# 1006 456 159
Model #HPDA311CWB
USER GUIDE
Smart Dimmer with Motion Sensor
THANK YOU
We appreciate the trust and confidence you have placed in Commercial Electric
through the purchase of this Smart Dimmer. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing
Commercial Electric!
Advertisement
Table of Contents
Related Manuals for Commercial Electric HPDA311CWB
Summary of Contents for Commercial Electric HPDA311CWB
- Page 1 Smart Dimmer with Motion Sensor THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this Smart Dimmer. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
-
Page 2: Table Of Contents
Table of Contents Safety Information .......... FCC Regulation ..........Wireless Protocol ..........5 Warranty ..............Package Contents .......... Installation ............. Operation ............... Mode of Operation ......... Sensing Area Coverage ....... Specification ............Troubleshooting .......... -
Page 3: Safety Information
Safety Information WARNING: • Not compatible with standard 3-way or 4-way. Do not exceed the load power rating limit of the device. Maximum total wattage rating: Up to 150 total watts for LED and CFL; 500W/120V for Incandescent/Halogen. • This product is to be installed or used in accordance with electrical codes and regulations. -
Page 4: Fcc Regulation
Responsible Party Leedarson America, Inc. 300 Technology Court SE Suite 100; Smyrna, GA 30082 1-678-293-8382 Unique Identifier: HPDA311CWB (SKU # 1006 456 159) Contains FCC ID: 2AB2Q-LA02301 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. - Page 5 FCC Regulation (continued) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modi cations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
-
Page 6: Wireless Protocol
Wireless Protocol The Wi-Fi CERTIFIED™ Logo is a certi cation mark of Wi-Fi Alliance®. Apple and the Apple logos are trademarks of Apple, Inc., registered in the U.S., and other countries. App Store is a service mark of Apple Inc. Google and Google Play logo are trademarks of Google LLC. - Page 7 HUBSPACE APP QUICK START GUIDE THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this Smart Dimmer. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
-
Page 8: Installation
Installation Install the dimmer in a single gang application. Turn power off at the circuit breaker or fuse for the dimmer that you are replacing. Remove the old dimmer by disconnecting all wires. Connect the new dimmer wires as follows. ①... - Page 9 Installation (continued) Mount the dimmer with the screws (C) and attach Wall Plate (B). Turn power ON at the circuit breaker or fuse. Installation is complete. Install the dimmer in a multi-gang application. In multi-dimmer installations, the reduction of the dimmer’s capacity may be required.
-
Page 10: Operation
Installation (continued) Maximum Load Per Dimmer for Multi-gang Load Bulb Single Two-Gang Three-Gang LED/CFL 150W 150W 150W Incandescent/ 500W 400W 400W Halogen NOTE: □ No derating is required for LED or CFL bulb applications. Operation Download the Hubspace™ app from the App Store or the Google Play Store. - Page 11 Operation (continued) Tap the ‘+’ button in the upper right corner to add your dimmer. My Home NOTE: Bluetooth access is required for device setup. Android phones must also enable Location functions to allow for Bluetooth scanning. Scan the QR code on the dimmer or in the Quick Start Guide.
- Page 12 Operation (continued) 1) Dim light from 1-100%. 2) Create schedules 3) Control dimmer settings: a) Sensor Mode - set the behavior of the light when you walk in the room and when you leave. b) Grace Period - The amount of time to turn on the dimmer automatically after the movement sensor times out.
- Page 13 Operation (continued) 3) Manual trim setting: Default trim is 20%-100%. The dimming range can be adjusted in the app to different values on a per-device basis. The trim can also be set without the app in the following manner: a) Short presses the “dim-up” and “dim-down” buttons at the same time three times.
-
Page 14: Mode Of Operation
Mode of Operation □ Below are 3 modes of operation available to select via app. Light turns on Light turns Modes Description when... off when… Single press the “Dim-up” button. If no motion is detected. Vacancy Manual turn on, (Default mode) Auto turn off Move around Single press the “Dim-... -
Page 15: Sensing Area Coverage
Sensing Area Coverage Horizontal eld of view: 30 ft 9.1m 3.3 ft 20 ft 6.1m Vertical eld of view: 18 ft 5.5m 8 ft 2.6m 6 ft 1.7m 7 ft 4 ft 2.1m 1.2m 4 ft 1.4m 20 ft 6.1m -14-... -
Page 16: Specification
Specification Input 120VAC, 60Hz 120VAC, 60Hz, Incandescent/Halogen Output 500W, CFL/LED 150W Maximum load Network Wireless Type 2.4GHz, IEEE 802.11b/g/n Operating Temperature 32° F(0°C)–104° F(40°C) Operating Humidity 5-85% RH, Non-condensing Certi cation FCC, ETL Troubleshooting Problem Possible cause and action Dimmable function works only with dimmable bulbs. What devices can be Maximum total wattage rating: controlled with the... - Page 17 Troubleshooting (continued) Problem Solution Circuit breaker or fuse has tripped. Light or LED indicator Load bulb is burned out. do not turn ON. Neutral connection of the loading bulb is not wired. Make sure the load bulb is dimmable. For complete details on our bulb compatibility, please look up the item number at www.homedepot.com/ Light is not dimmable, has...
- Page 18 Troubleshooting (continued) Problem Solution 1. Make sure the device is connected to power. 2. In the Hubspace app, tap +, then Add Device. I lost my QR code. How 3. On the Scan Device screen, tap the Search do I add a device? button in the lower right corner.
- Page 20 Questions, problems, missing parts? Before returning to the store, call Hubspace Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-592-5233 HOMEDEPOT.COM/Hubspace Retain this manual for future use.
Need help?
Do you have a question about the HPDA311CWB and is the answer not in the manual?
Questions and answers