Capturing Pictures; Quick Guide - Silvercrest DS-1020T User Manual And Service Information

English

Capturing Pictures

Quick Guide

Power the camera on by pressing the On/Off button [1]. The device
is now in capture mode.
Point the camera at the subject and check the composition of your
picture on the display [10].
If necessary, press the Zoom button [5] to zoom in (T - Tele) the
subject. Or press the Zoom Wide button [6] to zoom out the subject.
Press the shutter button [4] halfway down. This will enable the auto-
focus.
Now press the shutter button [4] fully down to take the picture. A
shutter sound can be heard.
Read the chapters from page 43 to learn how to use preset programmes.
24
The camera will try to focus the area contained within the
focus area [page 19, item 9]. This will depend on the
lighting conditions and the distance to the subject. After the
subject has been focused successfully, the focus frame will
become green and a double beep can be heard.
SilverCrest DS-1020T