Table of Contents
Advertisement
MOUNT THE AUTOBOOM VALVE
FIGURE 2. AutoBoom Valve Mounted on the Valve Mounting Plate
1. Secure the AutoBoom valve (P/N 063-0131-124) to the mounting plate (P/N 107-0171-619) using four
18 x 7/8" hex bolts (P/N 311-0052-104) and four 5/16" lock washers (P/N 313-1000-019).
NOTE:
Some models may offer a mounting plate from the factory (shown in the figure below). If this plate is
present, mount the AutoBoom valve to this plate, using the supplied mounting plate as a pattern to
drill holes.
FIGURE 3. AutoBoom Valve Mounted to the Center Rack
2. Secure the mounting plate to the machine's center rack using two 2-9/16" W x 3-1/2" L x 3/8" thread U-bolts (P/
N 107-0171-616) and four 3/8"-16 zinc flanged lock nuts (P/N 312-1001-164).
NOTE:
The valve should be installed on the left side of the machine's center rack.
Manual No. 016-0230-044 Rev. F
ULTRAGLIDE
5/16"-
53
Advertisement
Table of Contents
