Ronix 8530 Quick Start Manual page 8

.
SERVICE
Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety
of the power tool is maintained.
INSTRUCTIONS FOR USE
.
SAFETY RULES FOR CORDLESS SCREWDRIVERS
Hold power tools by insulated gripping surfaces when performing
an operation where the cutting tools may contact hidden wiring.
Contact with a "live" wire will make exposed metal parts of the
tool "live" and shock the operator.
Use clamps or other practical way to secure and support the
workpiece to a stable platform. Holding the work by hand or
against your body leaves it unstable and may lead to loss of
control.
Do not drill, fasten or break into existing walls or other blind
areas where electrical wiring may exist. If this situation is
unavoidable, disconnect all fuses or circuit breakers feeding
this worksite.
Battery tools are always in an operative condition. Be aware of
the possible hazards.
Always wear safety goggles or eye protection when using this tool.
Secure the workpiece, never hold it in your hand or across legs.
The drilling action may cause you to lose control of the workpiece
and injury may occur.
When installing a bit, insert the shank of the bit well within the
collet. If the bit is not inserted deep enough, the grip of the collet
8
3.6V LITHIUM CORDLESS SCREWDRIVER