Related Manuals for SPRT SP-L36
Summary of Contents for SPRT SP-L36
- Page 1 SPRT ® SP-L36 Portable Thermal Printer User’s Manual ( ver 0.04) Beijing Spirit Technology Development Co., Ltd www.sprt-printer.com...
-
Page 2: Table Of Contents
CONTENT NOTICE........................1 Notice of Safety....................1 Notice of Storing....................1 Chapter 1 Outer Appearance and Model No............2 1.1 Outer Appearance..................2 1.2 Model No......................2 Chapter 2 Characteristic Specification..............2 2.1 Printing Specification..................2 2.2 Physical Parameters..................3 2.3 Environment....................3 2.4 other Specification.................. -
Page 3: Notice
NOTICE Please read this manual carefully before using the printer! Notice of Safety Be sure to use the specified battery and power supply provided by our company. Otherwise it may cause fire, explosion or damage printer, meanwhile, the battery also may be damaged. -
Page 4: Chapter 1 Outer Appearance And Model No
Chapter 1 Outer Appearance and Model No. 1.1 Outer Appearance 1.2 Model No. Model Interface SP-L36BTDM USB and Bluetooth SP-L36W USB and WiFi Chapter 2 Characteristic Specification 2.1 Printing Specification Printer Method: Thermal line Paper Width: 79.5± 0.5mm, 57.5± 0.5mm Effective Printing width:72mm,48mm Resolution: 8 dots/mm (203dpi) Dots in each line: 80mm: 576dots/line... -
Page 5: Physical Parameters
● Printing Control Command: ESC/POS compatible command set/CPCL command set. (Pls refer to the details in “The Commands Manual of SP-L36”). ● Power Supply: 7.4V/2100mAh rechargeable polymer lithium battery. ● Low Power Alarm: When the electric of battery will run out, the battery icon in the printer screen will flash. -
Page 6: Chapter 3 Operation Method
Chapter 3 Operation Method Using Preparation 3.1.1 Battery Installation 1. Put the battery into the battery slot from the side with pins and press the other side into case. 2. Then tighten the M2.5*4 countersink screw (as below Pic.) 3.1.2 Paper Roll Installation 1. -
Page 7: Others
3.1.3 Others nstruction for opening or closing the paper case cover: Opening or closing the paper case cover slowly after pressing the OPEN button. Abnormal operation instructions: Paper blocking is not allowed at the outlet. Placement direction: Hold it flat and try to ensure the stability of running paper roll when printing. -
Page 8: Paper Feeding (Manual Feeding)
tone and LCD shows “Loading...”, loosen 【POWER】 button first and then release 【FEED】, the self-test will be printed out. 3.2.4 Paper Feeding (Manual Feeding) A. Standard Mode: Under the normal work status and apply to thermal receipt paper, press 【FEED】button, the paper feeding begins, and stops when loosen 【FEED】 button. -
Page 9: Battery Charging
different parameters. A. Under the state of power off, hold down the 【MODE】 button, then press the【POWER】button. Loosen the【POWER】button first and then【MODE】 button when you hear ‘one low one high prompt tone and LCD shows “Loading...”. The printer turns into the parameters setting mode. Press the 【FEED】... -
Page 10: Printer Parameters Settings
b. Upgrade in printing mode: In the power-on state, the printer can support printing mode upgrade when there is no error status. You can connect printer with PC by USB interface and use the "UpdateFirmware" tool to upgrade. Or "SprtPrinterUpdateTools" can be used (mobile upgrade tool). -
Page 11: Printer Interface Connection And Printing
Bluetooth( IOS Bluetooth 4.0 and Android Bluetooth 2.0) . Power class is CLASS 2, effective communication distance is 10meters. The Bluetooth of the printer belongs to the slave device. The initial name of the printer is SP-L36 BT Printer, the initial password is ‘1234’; users can change the printer name and password by using<SP-L36 Setting Tools>... -
Page 12: Wifi Connection
Notice: 1. When pairing, please make SP-L36 BT switch on. 2. Once SP-L36 has paired with the host successful, it can’t be paired with other Bluetooth device until it unconnected with the host. 3. The power indicator flashing after paired successful. Printer LCD shows the connection state. -
Page 13: Lcd Indication
3.8 LCD indication When the printer is turned on, the LCD screen of the printer will display a prompt message for startup. After the printer is initialized, the LCD will display the relevant information of the printer. If no data is sent to the printer or no external interface is inserted into the printer within 5 seconds, the LCD will automatically turn off the display. -
Page 14: Chapter 4 Other Information
Chapter 4 Other Information 4.1 Command Programming Manual <SP-L36 Technical Manual> is a technical manual for engineer to develop printer utility, and users can claim our company for it. 4.2 Description of Black Mark Pre-print If user use pre-print black mark to locate the receipt, please be sure to abide by the following black mark pre-print regulation when printing the black mark paper, if not ,it will cause that the printer can not identify the black mark. -
Page 15: Instruction On Label Paper
Printing Position: As the picture above, the black mark should be printed on the right or left edge of the side of words. Width range: Width ≥12mm (when using 80 black label paper); width ≥ 16mm (when using 58 black label paper) Height range: 4mm≤height≤6mm Reflectivity of infrared ray : <10% (infrared ray reflectivity of other parts of the black mark paper is>65%) - Page 16 Appendix A Setting instruction: hit the【MODE】button to choose “set” item; press it once, the set item will become the next alternative option, and it will print the present value of the chosen item. Hit the 【FEED】 button to set the value needed, when pressing it once , the value will become the next one in sequence After setting, hit the【MODE】and【FEED】button together, the current value will be saved, and printer enters into normal operation status.
- Page 17 Density: Paper sensitivity Setting: 80mm/58mm Paper Type Mode: Black Mark Location Setting: Power off Setting: Printing Direction Setting:...
- Page 18 Appendix B Setting instruction: hit the【MODE】button to choose “set” item; press it once, the set item will become the next alternative option, and it will print the present value of the chosen item. Hit the 【FEED】 button to set the value needed, when pressing it once , the value will alter to the next one in sequence After setting, it’ll quit the Setting mode automatically and save the current value after 5 seconds.
- Page 19 Beijing Spirit Tech Dev Co.,Ltd. Add: No. 26 Ave. 4, Chuangye Middle Road, Shangdi Information Industry Park, Beijing, CHINA Zip code: 100085, Tel: 010-51661178 FAX: 010-51661178-190 Technical support: 010-51661178-157 010-62969379 Service email: support@sprinter.com.cn...
Need help?
Do you have a question about the SP-L36 and is the answer not in the manual?
Questions and answers