Epson PowerLite S7 Quick Setup

PowerLite S7/79/W7
®

Quick Setup

Before using the projector, make sure you read the safety instructions in the
User's Guide on your projector CD.
Connect the projector
Choose from the following connections:
Computer Monitor Port
Connect a computer using the VGA cable that came with the projector.
Connect one end to the projector's Computer (Component Video) port,
and the other end to your computer's
notebook, switch it to external display. You can also connect an audio cable.
Computer USB Port (Windows
Connect a computer using a USB cable (not included).
Connect the square end of the USB cable to the projector's
(square) USB port. Connect the flat end of the cable to any USB port on your
computer. You can also connect an audio cable.
Follow the on-screen instructions to install the Epson USB Display software
(only on first connection). Then press the USB button on the remote control.
NOTE: If the software does not install automatically, open My Computer or
Computer, double-click EPSON_PJ_UD, then double-click EMP_UDSE.EXE.
External Monitor
Connect a monitor to the Monitor Out port.
NOTE: To use an external monitor, your computer must be connected to the
Computer (Component Video) port, not the USB port.
*411760900*
*411760900*
monitor port. If you are using a
only)
®
Type B

Video Player

Connect up to 3 video devices and use the remote control to switch between
them.
Audio in cable Audio out cable
(optional)
(optional) (optional)
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector.
3
Open the A/V Mute slide all the way.
4
Press the power button on the projector or remote control.
Power light
Power button
The power light flashes green, then stays on.
NOTE: To shut down the projector, press the
unplug it. You don't have to wait for the projector to cool down.

Adjust the image

1
If you don't see an image, press the Source Search button on the
projector or remote control to select the image source.
NOTE: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the right.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
S-Video RCA video cable Component video
cable (composite video) to VGA cable
(optional) (optional)
power button twice, then