1. Where to use your Electric Scarifier Intended use The SA40E is designed for aerating lawns and grass in private domestic gardens. It is not designed for use in public facilities, parks, sporting grounds, on roadsides, in agriculture or forestry.
Page 3
New users should be given supervision or instruction concerning the use of the garden power tool or given these instructions. 2.Children should not play with the garden power tool. 3.The garden power tool must be kept out of reach of children. 4.Store the instruction manual in a location accessible to all users of the garden power tool and always include the instruction manual when passing it on to other users.
Page 4
12. When leaving the machine unattended for any time, disconnect the mains power supply plug. Similarly, whilst transporting the powered tool from one work area to another disconnect the power and put the wear compensation lever in the transport position. 13.
Page 5
3.Assembly ① ② ② ③ ④ ⑤ ⑥ 1. Attach the cable hock ① to the upper handle ② (A) 1. Insert the lower handle ② into the knob ③, Then add the knob ③ to the bolt, next add the cylinder pin ⑤...
4.Operation Starting and Stopping: Make sure the blade has stopped rotating before switching “on” again. -Do not rapidly switch on and off. ① Press and hold the safety button Starting: ① Squeeze the switch lever ② ② Release the safety button towards the handle (E) Release the switch lever ②...
Page 7
Remove grass and deposits from wheels, aerator cylinder and hosing. Adjusting for wear: The Aerator is subject to wear in use due to the way in which it works . The more intensively the Aerator is used , the greater the wear on the ①...
Page 8
6. Aerator & Scarifier Cylinder Exchange Replacing aerator cylinder: Danger! The aerator cylinder can cause injuries! Prior to maintenance, unplug from the mains and wait until the aerator cylinder has stopped. Wear working gloves when rectifying faults. If the aerator cylinder is in wear adjustment position and 1.
7. Scarifier Operation It is recommended to start scarification/aeration at a point close to the power supply and to work your way away from the supply. Proceed at a right angle from the power supply and place the power cable to the side which has already been scarified (E). Warning:When scarifying do not allow the motor to labour particularly in heavy conditions.
Any damage that occurs from the use of non-genuine Cobra parts will not be covered. We reserve the right to reject any claim where the purchase cannot be verified or when it is clear that the product was not maintained properly.
10. EC-Declaration of Conformity EC Declaration of Conformity We herewith declare, Cobra Garden Machinery Henton & Chattell Ltd, London Road, Nottingham NG2 3HW UK That the following machine complies with the appropriate basic safety and health requirements of the EC Directive based on its design and type, as brought into circulation by us.
Need help?
Do you have a question about the SA40E and is the answer not in the manual?
Questions and answers