Alert Log List - Yamaha RM-CG Reference Manual

Alert log list

Display
important mic CH* broken
Dante hardware error
Firmware update failed, because
of *
Firmware update failed, because
of internal error
Web UI internal failure
failed to start audio proc
System error
Power unstable
Syslog setting error
logging error
Automatic audio tuning failed,
because of internal error.
Dante started in fail safe mode
Unable to configure Dante,
because the Dante device is
locked.
Resume data lost
Saving setting data failed
CPU temperature too high
Description
Important mic CH* broken.
Dante has not started up correctly.
Failure of firmware update has occurred.
Internal failure has occurred in Web GUI.
The device audio has not started up correctly.
The device has not started up correctly.
The device is not supplying power normally.
Failed to update syslog transfer servers.
Failed to restart logging.
Automatic audio tuning has failed, because
internal error has occurred.
Dante has started in failsafe mode.
Dante is currently limited to control settings,
because the device is locked.
The settings saved in internal memory has been
lost.
The device has not started up correctly.
CPU temperature has been too high.
RM-CG Reference Manual
Please contact your Yamaha dealer.
Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please initialize the memory.
Should this also fails, contact your Yamaha
dealer.
Check firmware file on the firmware update
pages of Web GUI.
Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please contact your Yamaha
dealer.
Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please initialize settings.
Should this also fails, contact your Yamaha
dealer.
Turn the power off, then turn on after waiting at
least six seconds. If this does not solve the
problem, please initialize the memory. Should
this also fails, contact your Yamaha dealer.
Connect to a PoE compatible switch. If this does
not solve the problem, please turn the power off,
then turn on after waiting at least six seconds.
Should this also fail, contact your Yamaha
dealer.
Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please initialize settings.
Turn the power off, then turn the power on after
waiting at least six seconds. Please try again. If
this does not solve the problem, contact your
Yamaha dealer.
Execute Failsafe Recovery using Audinate's
firmware update tool.
Unlock device lock using Dante Controller or
check Dante Domain Manager settings.
Initialize the memory. If this dose not solve the
problem, contact your Yamaha dealer.
Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please initialize the memory.
Contact your Yamaha dealer if problem still
exists.
Turn the power off, let the CPU cool down. Turn
the power on again. If the temperature is still too
high, check the installation environment and
whether dirt or a foreign object could have
clogged the cooling fan, and clean the fan if
necessary.
19
What to do