Firmware Update - Pocketbook InkPad Lite User Manual

Firmware Update

WARNING! Firmware Update is a responsible operation, during which
management software of the Device will be changed. In case of im-
proper execution control program may be damaged and will require
treatment in the service centre. Please perform the upgrade proce-
dure in accordance with the instructions below.
There are two ways to update the firmware.
Automatic Update
To start automatic software update select
Software Update.
The Device will begin to check available update sources in the
following order:
• Internal memory;
• Internet.
If default Internet connection is not set, the Device will ask to
connect to one of available wireless networks.
Also you can activate the automatic updates check
Software > Auto
connection only.
Manual Update
1. Open site www.pocketbook.ch. Select your country.
2. Click the
model of your Device.
3. Download the
4. Unpack the content of the archive, file SWUPDATE.BIN,
and copy it to the root folder of internal Device storage.
5. Switch off the Device by pressing button On/Off.
6. Press and hold the Forward and Backward buttons simulta-
neously, then switch on the device without releasing the Forward/
Backward buttons!
Update). In this case, the Device will use Wi-Fi
Support button on top menu. Select hardware
Firmware to your PC.
Settings > Software >
(Settings >