Shallow Water Alarm - Mercury SmartCraft Operation Manual

MONITOR – VERSION 2.00
Standard Information Display Screens
Depth
Ft

Shallow Water Alarm

You can set an alarm to trigger whenever the boat moves into water
shallower than the alarm level.
Setting Shallow Water Alarm.
1. The water depth screen must be displayed. Be sure Depth is
turned on in CAL 2. Refer to CAL 2 Calibration Section.
2. Press both and
3. The alarm on or off menu will appear.
4. Press the button to toggle to ON.
Depth
5. Push button to save.
6. The depth number will be flashing. Press the
the flashing number to desired alarm depth. 100 ft maximum
depth and 2 ft minimum depth.
Depth
7. Push button to save.
Water Depth
Displays the depth of water un-
der the transducer if connected.
You must have a depth
NOTE:
transducer (purchased separate-
ly) connected to the system in or-
der for this screen to operate.
buttons together for 3 seconds.
button to set
2-8