9. Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than To ensure correct operation, use this set-top box only with the Pace- the other. A grounding type plug has two blades and a third approved power supply unit provided.
Page 4
3 in. 3 in. curtains. • You can place your set-top box near other consumer electronics devices, such as stereo amplifiers or televisions, but you must not place it directly on top or underneath them. PX022ANx USER GUIDE Draft 15/01/13 (501-341930X)
SAFETY INFORMATION (cont.) Safety aspects of connections To ensure correct operation, use this set-top box only with the Pace-approved power supply unit provided. If you use an unapproved alternative, you will Full details of the rear panel are on page 6.
Connect to the HDMI input on your HDTV. Connect to compatible optional equipment that supports a USB 2.0 interface. Power Connect your set-top box’s power supply unit here. Make this connection last of all. CableCARD Module Removal will interrupt your service. PX022ANx USER GUIDE Draft 15/01/13 (501-341930X)
Please use the YPbPr component connection to watch TV. The HDMI output is then disabled, so no picture is transmitted from this connector. In that case, use the component video connectors to connect up (see Setup B). PX022ANx USER GUIDE Draft 15/01/13 (501-341930X)
AUDIO IN CABLE INPUT WALL AC OUTLET NOTE This diagram shows power cords that have 2-blade polarized plugs. You may need to use a different type of plug in the region where you live. PX022ANx USER GUIDE Draft 15/01/13 (501-341930X)
Do not, therefore, use a path through a VCR to watch your set-top box’s programs. Use the component type of plug in the region where video path or an alternate direct video path from your set-top box to your TV. Remember to select the you live. correct input on your TV. PX022ANx USER GUIDE Draft 15/01/13 (501-341930X)
Unplug your set-top box’s power supply unit from the wall AC outlet. Then plug this power supply unit in again at the wall AC outlet (and, if there is a switch by this outlet, switch it to its ON position). PX022ANx USER GUIDE Draft 15/01/13 (501-341930X)
TV when you use your set-top box and its remote control. Consult the information supplied by your cable service-provider for details on how to make the most of the digital cable services. Also read the operating instructions that are supplied with your remote control. PX022ANx USER GUIDE Draft 15/01/13 (501-341930X)
2. Pace reserves all rights not expressly granted to you under these Terms. 3. You may not transfer any of your limited rights in the Software without the prior written consent of Pace, and if consent is provided then the Software shall only be transferred in conjunction with the transfer of the Product AND ONLY IF the transferee has read and agreed to accept these Terms.
Page 13
These Terms are governed by the laws of the State of New York and you may only bring claims exclusively in New York courts and Pace shall be entitled to bring a claim in the courts of any jurisdiction. Any failure by Pace to enforce any of its rights hereunder or applicable law shall not constitute a waiver of such rights.
Page 14
Pace and are trademarks and/or registered trademarks of Pace plc. 501-341930x...
Need help?
Do you have a question about the PX022ANx and is the answer not in the manual?
Questions and answers
I need the cable code for a PX022ANx so that I can install my flipper controll remote V.12