General Infomation For Electrical Alignment; Notes For Adjustment; Equipment/Fixtures - Sony Betacam SX DNV-5 Maintenance Manual

General Infomation for Electrical Alignment

6-1. Notes for Adjustment

Before adjustment, set the POWER switch to ON and the
VTR switch to SAVE, and warm up the unit for about 10
munites.
Indication at the top right of the viewfinder screen
During adjustment using the setting menu, a bar sometimes
appeares at the top right of the viewfinder screen. The bar
indicater shows the current setting position and adjustable
range for the selected item.
Be sure to set the POWER switch to OFF before extracting
the printed circuit board.

6-2. Equipment/Fixtures

. Analog composite signal generator
Tektronix 1410/1411 or equivalent
. Analog component signal generator
Tektronix TSG-300 or equivalent
. Oscilloscope
Tektronix 2465B or equivalent
. Waveform monitor/Vectorscope
Tektronix 1750/1751 or equivalent
. Component serial waveform monitor
Tektronix WFM601 or equivalent
. Frequency counter
Advantest TR5821AK or equivalent
. Digital voltmeter
Advantest TR6845 or equivalent
. Audio Generator
Tektronix SG-5010 or equivalent
. Audio analyzer
Tektronix AA501A (OP.02) or equivalent
. Regulated DC power supply
(12 V variable, more than 5 A)
. AC adapter or batteries
Sony AC-DN1 or equivalent
. Camera adapter
Sony CA-701
. VTR composite/component adapter
Sony VA-5
. Monitor
Sony BVM-1410 or equivalent
DNV-5
DNW-7/90/90WS
Section 6
. Pattern box (PTB-500, 90 - 240 Vac)
J-6029-140-B
. Resolution chart
J-6026-100-A
. Gray scale chart (4:3)
J-6026-130-A
. Multi burst chart
J-6026-110-A
. White window chart
(Make a square hole at the center of a black sheet of
paper.)
. Multi connector cable
J-6031-840-B
. Alignment tape SR5-1 (NTSC)
8-960-075-01
. Alignment tape SR5-1P (PAL)
8-960-075-51
. Alignment tape SR2-1 (NTSC)
8-960-075-11
. Alignment tape SR2-1P (PAL)
8-960-075-61
. Blank tape *1
BCT-60SX
. Extension board (EX-501/541/542, Stays)
A-8312-804-A
*1 : "Blank tape" means a cassette tape on which no
video/audio signals are recorded.
6-1