Advertisement
Wireless Device Installation
FJ-IR-WIFI-1NA
Power supply
Possible mounting positions
10 ft +
10 ft
Total=20ft max
D
20 ft max
Setting up Wireless Device
You need the following:
• IntesisHome Device
• Wi‐Fi Device (laptop/smartphone/tablet)
• Access Point or Router
• Quick Start Guide/ Install manual
A
A
Get close to the device
•
•
Recommended for the following indoor types:
• Wall mounted
• Floor
• Compact Cassettes
20 ft direct
10 ft
+__
10 ft____
Total: 20 ft
FJ-IR-WIFI-1NA
Before starting
B
B
7Ft Max
Check Wi‐Fi Signal strength on the
placement location.
If you have enough Wi-Fi signal then proceed to install.
If you don't have enough Wi-Fi signal:
a. Try to install the IntesisHome device in another place
b. Move the router closer to Wi-Fi module.
To update the App status according to the last
command sent from the Fujitsu wireless
remote controller. Use the following Wi‐Fi
module mounting position illustrated below
when sending signal from the wireless
remote controller.
IR Emitter 1
IR Receiver
IR Emitter 2
OK
4
4
Advertisement
