CONTENTS 9. TROUBLESHOOTING .......23 SAFETY INFORMATION ....4 9.1 Troubleshooting ......23 1.1 Conditions Of Use ......4 9.2 If the drying results are not 1.2 Child Safety ........5 satisfactory ........24 1.3 Dryer Safety........5 1.4 Installation ........6 10. TECHNICAL DATA ......24 1.5 Electrical connection......6 11.
Page 3
Products must be used, installed and operated in accordance with this manual. You may not be able to claim on the Electrolux manufacturer’s warranty in the event that your product fault is due to failure to adhere to this manual.
SAFETY INFORMATION 1.1 Conditions Of Use This appliance is intended to be used in household and similar applications such as: • staff kitchen areas in shops, offices and other working environtment; • farm houses; • by clients in hotels, motels, and other residential type environments;...
ENGLISH 1.2 Child Safety • This washing machine is not intended for use by young children or infirm persons without supervision. • Young children should be supervised to ensure that they do not play with the appliance. • Keep children and pets away from the appliance when the door is open.
• The appliance must not be supplied when it is being moved. through an external switching device, • The rear surface of the appliance such as a timer, or connected to a must be put against a wall. circuit that is regularly switched on •...
ENGLISH 1.6 Fire Hazards Some fabrics are not suitable for tumble Foam rubber materials can produce drying. The following MUST NOT be fire by spontaneous combustion placed in your dryer due to the risk of a when heated. fire or an explosion: •...
2. PRODUCT DESCRIPTION Work top Control panel Drum lifter Lint filter Appliance door Exhaust grille Front feet Air inlet duct Outlet cover Outlet cover Back feet...
ENGLISH 2.1 Accessories Wall Mounting Kit: to invert the dryer on a wall upside down. Dryer Venting Kit: designed for dryers positioned directly against an outside wall. Control Panel Invert Sticker...
3. CONTROL PANEL Program selector knob Press the touch buttons with your finger in the area with the symbol Dryness Level touch button or name of the option. Do not wear Time Dry touch button gloves when you operate the control Extra Anticrease touch button panel.
ENGLISH 3.1 Display Symbol on the display Symbol description Digital Number; will show: • Drying cycle time. • Delay start time. • The alarm codes. Refer to the chapter “Troubleshooting” for their description. Delay start option on. Indicator: clean filter The Clean Filter indicator turns on and blinks at the end of each dry cycle to serve as a reminder to user to clean lint filter at the end of each load.
4. PROGRAM TABLE Program Load Fabric type This position to reset program/switching off the machine. Cottons Max. Ideal for towels or similar such as cotton and linen. Mixed Half Select this cycle to dry everyday fabrics including cottons, linens and sheets.
ENGLISH 5.5 Delay Start Dry Time Option Guidelines: Type of Load Suggested This option makes it possible to delay fabric Times the start of the program by 30 min, 60 min or 90 min and then by every hour 5 kg to 120 mins from 2 to 20 hours.
5.8 Enabling/Disabling End-Of- • To disable the buzzer sound, press “Dryness Level” and “Time Dry” Dry Buzzer touchpads at the same time for 3 seconds, the display will show “bOF” This setting permits you to either enable with the “BEEP, BEEP” sound.
ENGLISH 6. DAILY USE 6.1 Start a program without 6.2 Starting the program with delay start delay start 1. Prepare the laundry and load the 1. Set the correct program and appliance. For best result we options for the type of load. recommend to sort out your 2.
6.5 At the end of the program 6.6 Stand-by function Changing a running program is possible To reduce energy consumption, this only by resetting it. function automatically deactivates the appliance: • The appliance stops automatically. • After 5 minutes if you do not start •...
ENGLISH 7. DRYING HINTS Your load, when dry must not Separate the lint “givers” and the exceed the rated capacity of your lint “collectors” to minimise this dryer. problem. • Clothes that give lint include towels, 7.1 Preparing the laundry nappies, chenille.
• Fibre or leather materials - always To help you, here is a list of the average weights of some common laundry items. check the manufacturer’s instructions. • Baby clothes and night gowns Sheet 700g - 1000g - acrylic clothing or sleepwear use...
ENGLISH 8. CARE AND CLEANING 8.1 Cleaning the lint filter LINT BUILD-UP IS A FIRE HAZARD A clean lint filter reduces drying times, saves energy and avoids overheating. Overheating may also damage your clothes. What happens If I forget to clean the lint filter? tripled doubled...
8.3 Cleaning the control panel Use a standard neutral soap detergent to clean the control panel. Use a moist cloth to clean. Dry the cleaned surfaces with a soft cloth. CAUTION! Do not use furniture cleaning agents or cleaning agents which can cause...
ENGLISH 9. TROUBLESHOOTING 9.1 Troubleshooting Problem Possible solution Make sure that the mains plug is connected to You cannot activate the the mains socket. appliance. Check fuse in fuse box (domestic installation). Press Start/Pause. The program does not start. Make sure that the appliance door is closed. Make sure that the installation of the filter is correct.
9.2 If the drying results are not satisfactory • The set program was incorrect. • The filter is clogged. • There was too much laundry in the appliance. • The drum is dirty. • Room temperature is too low or too high ( optimal room temperature 19°C...
There are 2 venting options • Front • Rear - using a included kit Important: Use only kits approved by Electrolux with your dryer. The exhaust duct must not exceed 2...
100mm diameter. appliances burning other fuels, including open fires, when operating the tumble If connecting the dryer to a common dryer. This is not applicable where a ducting system, safety advice should be venting hose is directed to an open requested from the manufacturer.
ENGLISH 11.4 Electrical Connection CAUTION! The manufacturer declines any This machine is designed to operate on responsibility for damage or injury a 230 V, single-phase, 60 Hz supply. through failure to comply with the “An incorrect power supply may void above safety precaution.
Need help?
Do you have a question about the EDV754H3WB and is the answer not in the manual?
Questions and answers