System Settings (Menu) - Boss RC-505 MKII Owner's Manual

System Settings (MENU)

For details on the parameters, refer to "Parameter Guide" (PDF).
1 .
Press the [MENU] button.
The MENU screen appears.
2 .
Use the [K] [J] buttons to switch to the page
containing the item you want to edit.
3 .
Press the [1]–[4] knobs to select the item that you want
to edit.
4 .
If you see another screen with items to select, repeat
steps 2 and 3.
5 .
Use the [K] [J] buttons to switch to the page
containing the parameter you want to edit.
6 .
Turn the [1]–[4] knobs to change the value.
7 .
Press the [EXIT] button a number of times to return to
the play screen.
Item Parameter/Explanation
SETUP
Settings related to the input and output jacks,
such as phantom power on/off.
EQ
INPUT
Settings for applying an equalizer effect to the
input sound for each connector/jack.
DYNAMICS
Settings for applying a compressor or noise
suppressor to the input sound.
SETUP
Settings related to the output jacks, such as stereo
link.
ROUTING
Settings for assigning the playback sound from
tracks 1–5 and the input/rhythm sound from each
input jack/connector to the output jacks.
OUTPUT
EQ
Settings for applying an equalizer effect to the
output sound, configured for each output jack.
MASTER FX
Settings for the compressor and reverb effects
that are applied to the output sound.
Sets the input/output levels for each jack and
MIXER
connector (p. 8).
PANEL PLAY, PANEL UNDO
Settings for the [TRACK] button/[FX] buttons
(tracks 1–5), for the [TRACK] button during undo/
redo, and for the [FX] button functions.
CTL/EXP
Settings for assigning functions to a footswitch or
expression pedal connected to the CTL 1, 2/EXP 1
CTL FUNC
jack or the CTL 3, 4/EXP 2 jack.
PREFERENCE
Selects whether to switch the PANEL PLAY, PANEL
UNDO, and CTL/EXP settings to either the settings
for each memory or to the system settings.
* When switching to the settings for each
memory, use the write operation to save the
settings to memory.
ASSIGN 1–16
Settings for the ASSIGN section.
By using the assign settings, you can control other
parameters at the same time as the specified
functions that are executed when you operate this
ASSIGN
unit's buttons/knobs, or a footswitch/expression
pedal connected to the CTL 1, 2/EXP 1 jack or CTL
3, 4/EXP 2 jack.
You can also configure this unit to be controlled
from an external MIDI device.
There are 16 different assign settings.
17