Using Maintenance Mode - Epson Stylus Pro 3880 User Manual

Maintaining and Transporting the Printer

Using Maintenance Mode

Maintenance mode allows you to change the language or units of
measurements used in the printer's menus and return all the menu settings
to their default values.
Follow these steps to use maintenance mode:
1. Make sure the printer is turned off.
2. Press and hold the + Cancel/Reset button, then press the P Power
button until the printer turns on.
the LCD panel.
3. Press u or d to select the settings described below. If you need to back
up to the previous menu level, press the l button.
To change the language displayed on the LCD panel, select
•
LANGUAGE
want, then press
or + Cancel/Reset to exit.
To change the units of measurement, select
•
Select
METRIC
Press l to return to the menu or + Cancel/Reset to exit.
To return all control panel settings to their default values, select
•
DEFAULT PANEL
printer's defaults. Then press l to return to the menu or +
Cancel/Reset to exit.
4. To exit maintenance mode, turn off the printer by pressing the P Power
button. Press the P Power button again to turn on the printer in the
normal operating mode.
5-113
MAINTENANCE MODE
and press r. Press d until you see the language you
Enter to select it. Press l to return to the menu
or and then press
FEET/INCH
and press r. Press
| 113
appears on
and press r.
UNIT
Enter to select it.
Enter to restore the