Ir System Code - Maquet 1133.12B1 Operating Instructions Manual

Table of Contents

Advertisement

Fig.III-7:
IR code
0
Fig.III-8:
IR code
14
III. General description
3

2.3.1 IR system code

Every IR remote control is unequivocally assigned to an
operating table by way of the electronic encoding. The
operating table has the same system code as the as-
sociated IR remote control.
You can see from the label at the operating table col-
umn whether IR reception has been activated for this
operating table. If the IR code is crossed out, then the
infrared reception is blocked for the operating table.
The encoding for the operating table and the IR remote
control as well as activating/blocking the IR reception
are performed by authorized personnel.
The operating table and the associated IR remote con-
trol are marked by adhesive labels bearing the system
code which has been set:
The adhesive labels are affixed to the operating ta-
ble column next to the IR receiver.
The adhesive labels are affixed to the back of the IR
remote control.
The two dot-shaped adhesive labels bear a number from
0 to 9 or a letter from A to F :
left
0,1,2,...,A,B,...,F
right
0,1,2,...,A,B,...,F
Examples of IR system codes which have been set:
Identification:
Note:
The order of the identification letters/numbers is
singificant, i.e. the IR system code 4 B does not
equal B 4.
Note:
Always leave the IR remote control at the working
location for the associated operating table, since
the operating table can be adjusted only by using
this particular IR remote control.
Of course, the operating table can be adjusted via a
corded hand control or the override system at any
time, regardless of the IR remote control.
Note:
The transmission power of the IR remote control ist
sufficient to operate the draped operating table even
from a greater distance. If the desired adjustment is
not executed by the operating table, even though a
function button is depressed completely, then you
should re-aim the IR remote control or move to an-
other position in the OR. In such cases the receiver
is probably being blocked by a person's body.
1133.12B1/B3/F1/F3
1
5
3
A
C
2
D
A
GA113312EN02

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1133.12B1 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

1133.12b31133.12f11133.12f3

Table of Contents

Save PDF