Replacing An Ink Cartridge - Epson Stylus Photo R320 Printer Basics Manual

If you don't see any improvement after cleaning three or four times, check the solutions
beginning on page 64. You can also turn the printer off and wait overnight—this allows
any dried ink to soften—and then try cleaning the print head again.

Replacing an Ink Cartridge

You can check the status of the ink cartridges by looking at the icons on the control panel.
Press the to highlight
The level of ink shown on the icons indicates the approximate amount of ink remaining. If an
ink cartridge is low, the red
new cartridge.
If an ink cartridge is empty, the red
display telling you that the cartridge needs to be replaced.
Caution: You cannot print if any ink cartridge is empty. Leave the empty cartridge
installed in the printer until you have obtained a replacement, or the ink remaining in
the print head nozzles may dry out. To ensure good results, use genuine Epson ink
cartridges and do not refill them. Other products may cause damage to your printer
not covered by Epson's warranty.
When an installed cartridge is more than six months old, you may need to replace it
if printouts don't look their best. If the quality doesn't improve after cleaning and aligning the
print head, you can replace the cartridge even if the
More Options.
Ink cartridge levels
b
error light flashes. This is a good time to make sure you have a
b
error light remains on and you see a message on the
b
error light is off.
Replacing an Ink Cartridge
51