Page 1
Blueskysea DV688 Motorcycle Camera User Manual Thank you for you choosing Blueskysea DV688 Motorcycle camera,please read this user manual carefully before use it, and keep it for future reference. If you need any assistance,please feel free to contact our customer support...
Main features: 1.This DV688 Motorcycle camera comes with 2 (two) full HD 1080p cameras. Both the front and rear cameras record high quality video 1080P at 30fps. 2.The camera starts recording automatically when the ignition is switched on and stops recording automatically when the ignition is switched off after a brief shutdown sequence.
Structure diagram: Menu Setting button Power button Mode Switch OK button Down Led Indicator Screen Reset Hole Micro SD Card Slot Battery Camera Connector Power Connector Wired Controller Connector (Red Cable) (Yellow Cable) Camera A Mount hole Camera B Led indicator Photo Snapshot/File Locked button Power Adapter 3 Meters Connection Cable...
Blueskysea DV688 Motorcycle Camera User Manual Thank you for you choosing Blueskysea DV688 Motorcycle camera,please read this user manual carefully before use it, and keep it for future reference. If you need any assistance,please feel free to contact our customer support team by email support@blueskysea-inc.com...
Page 5
Button Function & LED Indicator Long press to Power On/Off; Short press to switch Power Button Screen On/Off. Menu Button Menu Setting Function,Such as Resolution, Language,etc Mode Button Short press to switch Preview Mode/Playback Mode. Start recording,Stop recording, and selection OK Button confirmation In Preview mode and Recording mode: Short press...
Specification: Blueskysea Dv688 Processor Allwinner V3 CMOS Sensor 2MP Sony IMX323 Lens Optical Parameters 7G (6G+IR), F1.8, f2.8mm Lens Angle 130 degree Video resolution 1920x1080P 30fps; 1280x720P 30fps Video Codec/Format H.264 / Mp4 Photo Resolution 1/2/5/8MP Photo Format Audio Mic on wired controller/Speaker on DVR Memory card capacity Up to 128Gb Max.(not includes in package)
Basic operation: Insert/remove Micro SD card: 1. Insert one micro SD card (Class 10, 16GB or larger) into camera and push until it locks into place. 2. To remove the micro SD card, press the end of micro SD card until it clicks and releases from the slot, and then pull out the SD card.
1 connection to the “power adapter” cable on the DVR. The GPS route will be displayed on Google maps when you playback the video in GPS Player. To play back, open GPS Player (Please download GPS Player software at.www.blueskysea-inc.com)
2018-06-26 17:24:41 Date/Time Camera A Camera B Micro SD Card Audio recording on/ Audio recording off Battery capacity icon GPS (optional) GPS icon in red color indicates GPS located; GPS icon in gray color indicates GPS location failed; Main Menu setting: >...
Page 10
Video resolution: (1920x1080p) 30fps / (1080x720p) 30fps are the two available video resolution options. Default resolution is 1080x720p. Photographic resolution: 1M/2M/5M/8M are the available options for still picture resolution. Default resolution is 5MP. Loop video: Loop recording mode cannot be switched off. The camera will continuously erase the oldest video as it records a new video.
Page 11
Screen image(Mirror image): There are two options available: On/Off (this only affects camera B) Default value is off. Press OK button to switch mirror image on/off Screen switch on/ off setup: There are three options available (minutes): 1/3/5/Shutdown Default value is 3 minutes. The screen will turn off automatically to save power at the selected time interval.
Page 12
Be careful! All files,included locked files will be deleted if you are sure to format the memory card! Restore factory settings To restore the device to its original manufacturer settings. Version This setting displays the current internal firmware version. When contacting customer service or support (support@blueskysea-inc.com) please have this information available.
5. The unit will power up and the display will show the output from both cameras. Make sure to identify the orientation of the cameras (which direction is up in relation to the mounting hardware) in an effort to ease the installation process. Dv688 Power adapter wiring diagram Power + Motorcycle...
Page 14
Quick Installation Guide 1. Identify an appropriate location to install the front and rear cameras, wired controller, DVR unit and GPS antenna (optional). We recommend that the DVR unit be mounted under the seat for maximum security. 2. Plan the routing of camera and power cables before installation. (Wired controller cable, GPS tracker cable if desired).
Once the view angle is set, tighten the lens cap. Be careful not to overtighten the lens cap. 360° Dv688 360° loosen clip by the L Shaped Hex Screwdriver and adjust camera direction if necessary!
Page 16
Camera System installation Method 1: The DVR is installed in the front position, in this way, the front lens cable is 1.5 meters, and the rear lens cable is 4.5 meters. Front camera Wired controller Back camera Method 2: The DVR unit is installed under the seat or in a storage compartment. In this installation method, the front camera cable is 3 meters, and the rear camera cable is 3 meters Front camera...
Page 17
4. Exposing the DVR to open flames can cause explosion. Due to local laws and vehicles safety considerations, do not manually operate the device while driving. 5. Please read the user manual carefully before operation. Customer Contact information www.blueskysea-inc.com twitter@Bob59521 FB@BSSDashcam CS@blueskysea-inc.com Support@blueskysea-inc.com...
Page 21
Blueskysea DV688 Motorcycle Camera User Manual Thank you for you choosing Blueskysea DV688 Motorcycle camera,please read this user manual carefully before use it, and keep it for future reference. If you need any assistance,please feel free to contact our customer support team by email support@blueskysea-inc.com...
Need help?
Do you have a question about the DV688 and is the answer not in the manual?
Questions and answers