Selecting A Supported Display Mode - Lenovo ThinkCentre TIO27 User Manual

Selecting a supported display mode

The display mode that monitor uses is controlled by the computer. Therefore, refer to your computer
documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes. This is normal and the
image can be readjusted using automatic image setup and the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel
technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently configured
to a display mode outside the range of this monitor, you may need to re-attach the CRT monitor
temporarily until you have re-configured the system; preferably to 2560x1440 at 60Hz, which
is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-2. Factory set display modes
Addressability
480p (640x480)
480p (720x480)
720p
1080i
1080p
720x400
640x480
800x600
1024x768
1280x1024
1440x900
1600x900
1680x1050
1920x1080
1920x1200
2560x1440
Refresh rate
60Hz
60Hz
50/60Hz
50/60Hz
50/60Hz
70 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
2-15
Chapter 2.