Panasonic KV-N1058X Operating Manual page 99

Item
Data Transfer Notification
Prefix Removal
(Email Subject)
Only displayed when the display language is English.
*1
Counter
Item
Scan
System
After Clean Roller Counter
After Replace Roller Counter
Clean Roller Timing
Replace Roller Timing
Sets the notification method (Off / Display / Email) that is used to
indicate that scanning is complete when scanning with an option
selected in "Output to" and "Scan Settings".
•
Off: No notification
•
Display: Display the transfer result on the LCD
•
Email: Send the transfer result to "From Address" by E-mail
–
No user authentication: "From Address" in the "SMTP" settings
(page 107)
–
With user authentication: "From Address" in the "Access
Restrictions"settings (page 110)
Enable (On) or disable (Off) the settings.
•
Off: Email Subject is "<Host Name> : <Type Code> : <Sequence
ID> <User defined subject>".
•
On: Email Subject is "<User defined subject>".
In the case of an SMTP server test, error notification or scan
notification, the prefix is not removed from the E-mail subject, in
order to clarify who the sender is.
The number of documents scanned during the scanning process.
This counter is cleared each time you start scanning.
The number of documents scanned by the scanner since it was
shipped from the factory.
The number of documents scanned since clearing the counter after
cleaning the rollers. Clear after cleaning the rollers.
The number of documents scanned since clearing the counter after
replacing the rollers. Clear after replacing the rollers.
You can change the number of documents scanned before the Roller
Cleaning Notification occurs, if necessary.
You can change the number of documents scanned before the Roller
Replacement Notification occurs, if necessary.
Contents
Contents
12.4 Function tab
99