Connect The Printer - Epson Stylus C84 Start Here Manual

Epson stylus c84: quick start
Hide thumbs Also See for Stylus C84:
Table of Contents

Advertisement

5
Close the cartridge cover.
6
Press the ink button and close the
printer cover.
The green power light flashes as your
printer charges ink for several seconds.
CAUTION: Don't turn off the printer
while the green power light is
flashing, unless the printer hasn't
moved or made any noise for more
than 5 minutes.
4
4

Connect the Printer

Connect the Printer
Printer cables are not included with your printer. You need only one of the
following cables:
• USB cable (Windows
• Parallel cable (Windows only).
NOTE: If you have Windows NT 4.x, you must use a parallel cable.
USB Cable Users (Windows or Mac
1
Make sure your computer is turned off. Keep it turned off until section 6,
"Install Software."
2
Plug the
of the printer.
3
Plug the
(You can use any open USB port.)
Parallel Cable Users (Windows only)
1
Make sure your computer is turned off. Keep it turned off until section 6, "Install
Software."
2
Plug the end of the cable with the slotted connector into the parallel port on the side
of the printer, then secure it with the wire clips.
3
Plug the end of the cable with the screws on the side into your computer's
parallel port and secure it.
End with screws
) or
®
or Macintosh
®
square end of the cable into the USB port on the back
flat end of the cable into your computer's USB port until it stops.
Flat end
®
)
Square end
Slotted
end
Turn over

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Stylus C84 and is the answer not in the manual?

Questions and answers

Table of Contents