Install Software; Windows Me And 98 - Epson Stylus C64 Start Here Manual

6

Install Software

Windows
Follow the steps below to install the software for your operating system.
Windows XP
1
Make sure your printer is connected and turned on.
Then turn on your computer.
2
Wait for Windows to detect your printer and display a screen like this:
DON'T CLICK ANY BUTTONS ON THIS SCREEN.
Note: If a screen like this doesn't appear, make sure your printer
is turned on and connected.
3
Put the EPSON CD in your CD-ROM or DVD drive and wait a few
seconds for the CD to be recognized.
Your printer software installs automatically and various messages
appear on the screen.
4
When installation halts, click Finish.
5
You see the license agreement. Read the agreement and click Agree.
You see the Options Menu. Continue with the instructions in
"Finishing Windows Installation" to complete the software installation.

Windows Me and 98

1
Make sure your printer is connected and turned on.
Then turn on your computer.
2
Wait for Windows to detect your printer and display a screen like this:
DON'T CLICK ANY BUTTONS ON THIS SCREEN.
Note: If a screen like this doesn't appear, make sure your printer
is turned on and connected.
3
Put the EPSON CD in your CD-ROM or DVD drive and wait a few
seconds for the CD to be recognized.
4
Click Next on the Add New Hardware Wizard Screen.
(In Windows Me, you may not need to click Next.)
Me
If you're using Windows Me, go to step 9.
98
If you're using Windows 98, continue with step 5.
®
continue