Huawei eLTE2.2 eA660 Series User Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Gateway
  5. eLTE2.2 eA660 Series
  6. User manual

Huawei eLTE2.2 eA660 Series User Manual

Cpe
Hide thumbs Also See for eLTE2.2 eA660 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
eLTE2.2 eA660 Series CPE
User Guide
Issue
01
Date
2013-10-30
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading

Related Manuals for Huawei eLTE2.2 eA660 Series

Summary of Contents for Huawei eLTE2.2 eA660 Series

  • Page 1 Series CPE User Guide Issue Date 2013-10-30 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...

  • Page 3: About This Document

    Series CPE V100R001C01 Intended Audience This document is intended for: System engineers Product engineers Technical support engineers Change History Issue 01 (2013-10-30) This is the first commercial release. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 4: Table Of Contents

    3.2.5 Cable Connection ..............................38 3.3 Installation Check ............................... 42 4 Configuring the eA660 ....................... 45 5 Maintenance ..........................46 5.1 Maintenance Preparation ............................46 5.2 Fault Diagnosis ................................46 Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 5: Overview

    Overview 1.1 Product Introduction HUAWEI eA660 is a piece of customer premises equipment (CPE) that functions as the long term evolution (LTE) wireless gateway. It implements the conversion between LTE wireless data and wired Ethernet data and supports data backhaul. The eA660 series can be used independently and deployed outdoors.

  • Page 6: Application Scenarios

    For details about the eA100, see the eLTE2.1 eA100 Series CPE Product Description. Figure 1-1 shows an application scenario in which the eA660 is used with the eA100. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 7 Figure 1-2 The eA660 deployed in industrial private networks The following example describes how to use the eA660 for video monitoring. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 8 If the eA660 connects to multiple devices, connect the power adapter to a Hub or switch and then to the eA660, as shown in Figure 1-4. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 9: Hardware Specifications

    Meets the 3GPP 36 101 Meets the 3GPP 36 101 standard standard < -100 dBm/5 MHz < -96 dBm/10 MHz < -97 dBm/10 MHz < -94.2dBm/20 MHz Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 10: Antenna Specifications

    (LTE Band 38) Input impedance 50 ohm 50 ohm < 2 < 2 Gain 13 dBi 16 dBi Polarization Dual polarization Dual polarization Radiation pattern Directional antenna Directional antenna Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 11: Hardware

    Panel The panel of the eA660 provides the Power over Ethernet (PoE) port, SIM card maintenance window, and indicator. Figure 2-2 shows the panel of the eA660. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 12 Grounding end Connects a ground cable Nameplate Displays the identifier information of a vendor Anti-scalding label Anti-scalding sign External antenna interface NOTE Only supports dual-polarized antenna or dual Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 13 RSSI Steady on The signal strength ranges from –40 dBm to –60 dBm. NOTE The blink frequency Blink per 500 ms The signal strength ranges from –60 Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 14: Ea660 Cables

    Name Description Color Black Outer diameter 6.8 mm Working temperature range –40°C to 75°C 2.2.2 Ground Cable The ground cable ensures the proper grounding of the eA660. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 15 Table 2-4 Technical specifications of the ground cable Name Description Color Yellow-green Cross-section 6 mm² Outer diameter 5.1 mm Working temperature range –10°C to 70°C Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 16: Installation

    Table 3-1 lists the tools used for installing the eA660. Table 3-1 Installation tools Hammer drill ESD gloves Vacuum cleaner Phillips screwdriver Flat-head screwdriver (M3–M6) (M3–M6) Heat gun Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 17: Installation Procedure

    3.2 Installation Procedure 3.2.1 Mounting on a Utility Pole (Without an Angle Adjusting Component) Prerequisites The eA660 and mounting components are ready, as shown in Figure 3-1 Table 3-2. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 18 Table 3-2 Mounting components Name Mounting frame Hose clamp Context Figure 3-2 shows the flowchart for mounting the eA660 on a utility pole without an angle adjusting component. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 19 Step 1 Open the SIM card maintenance window of the eA660 and insert the SIM card, as shown in Figure 3-3. Figure 3-3 Installing the SIM card Figure 3-4 shows the correct installation method. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 20 SIM card maintenance window is waterproof. Do not fasten the screws until the SIM card maintenance window has been correctly installed. Step 2 Insert the hose clamp to the wall-mounting frame, as shown in Figure 3-5. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 21 Figure 3-6 Adjusting the length of the hose clamp Step 4 Fix the eA660 on the wall-mounting frame through the dovetail groove, as shown in Figure 3-7. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 22 Figure 3-7 Installing the eA660 on the wall-mounting frame Step 5 Tighten the wall-mounting frame's screw, as shown in Figure 3-8. Figure 3-8 Tightening the screw ----End Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 23: Mounting On A Utility Pole (With An Angle Adjusting Component)

    Angle adjusting component Mounting frame Hose clamp Context Figure 3-10 shows the flowchart for mounting the eA660 to a utility pole equipped with an angle adjusting component. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 24 Step 1 Open the SIM card maintenance window of the eA660 and insert the SIM card, as shown in Figure 3-11. Figure 3-11 Installing the SIM card Figure 3-12 shows the correct installation method. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 25 SIM card maintenance window is waterproof. Do not fasten the screws until the SIM card maintenance window has been correctly installed. Step 2 Insert the hose clamp to the wall-mounting frame, as shown in Figure 3-13. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 26 Figure 3-14 Adjusting the length of the hose clamp Step 4 Fix the angel adjusting component onto the mounting frame using the dovetail groove, as shown in Figure 3-15. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 27 When adjusting the horizontal angle, after you loosen the hex screws, you must lift the front end of the angle adjusting component to separate the gears. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 28 Step 5 Tighten the angle adjusting component's screw, as shown in Figure 3-18. Figure 3-18 Tightening the screw Step 6 Fix the eA660 on the angle adjusting component using the dovetail groove, as shown in Figure 3-19. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 29 Figure 3-19 Installing the eA660 on the angle adjusting component Step 7 Tighten the wall-mounting frame's screw, as shown in Figure 3-20. Figure 3-20 Tightening the screw ----End Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 30: Mounting On The Wall (Without An Angle Adjusting Component)

    Figure 3-21 eA660 and wall-mounting components Table 3-4 Wall-mounting components Name Wall-mounting screw Mounting frame Context Figure 3-22 shows the flowchart for mounting the CPE on the wall. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 31 Step 1 Open the SIM card maintenance window of the eA660 and insert the SIM card, as shown in Figure 3-23. Figure 3-23 Installing the SIM card Figure 3-24 shows the correct installation method. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 32 Step 2 Hold the wall-mounting frame tightly against the wall, use a level to adjust the horizontal position, and mark the fixing points with a marker, as shown in Figure 3-25 Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 33 Step 4 Align the two fixing points with the bolts on the wall and tighten the expansion bolt's screw nut to fix the wall-mounting frame, as shown in Figure 3-27. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 34 Step 5 Install the ground cable. For details, see Step 1 in Cable Connection. Step 6 Fix eA660 to the wall-mount frame using the dovetail groove, as shown in Figure 3-28. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 35 Series CPE User Guide 3 Installation Figure 3-28 Fixing the CPE Step 7 Tighten the wall-mounting frame's screw, as shown in Figure 3-29. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 36: Mounting On The Wall (With An Angle Adjusting Component)

    Figure 3-29 Tightening the screw ----End 3.2.4 Mounting on the Wall (with an Angle Adjusting Component) Prerequisites The eA660 and mounting components are ready, as shown in Figure 3-30 Table 3-5. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 37 Figure 3-30 eA660 and wall-mounting components Table 3-5 Wall-mounting components Name Wall-mounting screw Mounting frame Angle adjusting component Context Figure 3-31 shows the flowchart for mounting the CPE on the wall. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 38 Step 1 Open the SIM card maintenance window of the eA660 and insert the SIM card, as shown in Figure 3-32. Figure 3-32 Installing the SIM card Figure 3-33 shows the correct installation method. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 39 Step 2 Hold the wall-mounting frame tightly against the wall, use a level to adjust the horizontal position, and mark the fixing points with a marker, as shown in Figure 3-34 Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 40 Step 4 Align the two fixing points with the bolts on the wall and tighten the expansion bolt's screw nut to fix the wall-mounting frame, as shown in Figure 3-36. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 41 Step 7 Fix the eA660 to the wall-mounting frame using the dovetail groove. For details, see Step 6 in Mounting on a Utility Pole (with an Angle Adjusting Component). Step 8 Tighten the wall-mounting frame's screw, as shown in Figure 3-37. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 42: Cable Connection

    Figure 3-37 Tightening the screw ----End 3.2.5 Cable Connection This section describes the procedure for connecting the eA660 cables. Procedure Step 1 Connect the ground cable, as shown in Figure 3-38. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 43 Figure 3-38 Connecting the ground cable Tighten the ground screws and apply antirust paint to it. Step 2 Install the crystal connector to PoE network cable, as shown in Figure 3-39. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 44 Step 3 Connect the PoE network cable. Diassemble the PG-head screw cap and air-proof block on the PoE port, and pass the network cable through them, as shown in Figure 3-40. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 45 Figure 3-41. Figure 3-41 Installing the PG-head screw cap and air-proof block Step 4 Connect the PoE adapter. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 46: Installation Check

    Table 3-6 Hardware installation check of the eA660 Check Item The installation position must strictly comply with the design drawings, meet the installation space requirements, and reserve space Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 47 Power cables or PGND cables with connectors are not used. The connector of the PoE network cable must be appropriately connected. Step 2 Perform the power-on check, as shown in Figure 3-43. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 48 If the RSSI indicator is off when the eA660 powers on, the signal strength is too weak. Check the power supply and the angle of the angle adjusting component. For details about the indicator status, see Table 2-2. ----End Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 49: Configuring The Ea660

    Step 3 Choose System > Password Modification to modify the New Password. Use the default values of other parameters. To change the default settings, contact technical support engineers for help. ----End Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 50: Maintenance

    When the CPE does not run properly, use the tools on the Web management page to perform initial diagnosis. Prerequisites The network deployment is complete. The installation of the eA660 is complete. The eA660 starts appropriately based on default parameters after power-on. Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 51 Wait until the system check is performed. The possible causes will be displayed on the page. Click Export to export the detailed information to the computer. If necessary, send the detailed information to maintenance personnel. ----End Issue 01 (2013-10-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Table of Contents