Maintenance and service
④ Firstly, start the engine of the
vehicle with the normal battery.
Then, start the engine of the
tractor with the discharged bat-
tery.
⑤ After the engine is started, dis-
connect the negative cable first.
Then, disconnect the positive
cable.
⑥ Charge the discharged battery
for approx. 30 minutes after the
engine is started.
Warning
•
Make sure to connect the posi-
tive terminal first and connect
the negative terminal to the en-
gine body of the tractor with the
discharged battery.
5 - 16
RK37S,RK37SC-영문-05(마).indd 16
►
checking electric Wir-
ing
(1) L o o s e w i r i n g t e r m i n a l s c a n
cause contact failure and dam-
aged wirings can lead to perfor-
mance deterioration of electric
devices, short circuit and fire.
Replace or repair aged and
damaged wirings.
() If wiring sheath is peeled off,
wrap wiring with insulating plas-
tic tape.
(3) If fasteners or bands to fix wir-
ings are damaged, fix wirings
with clamps.
() Have wirings checked by your
workshop once a year regularly
to avoid fire.
Fuse Box
Normal
Open circuit
T5O533A
►
checking and replac-
ing Fuse
(1) body fuse box
Fuses are installed in this tractor
to prevent any possible accident in
case of wiring circuit malfunction.
If the electric system is malfunction-
ing during driving, check for any
blown fuse.
2018-12-11 오전 8:47:49
T39O517A
Need help?
Do you have a question about the RK37S and is the answer not in the manual?
Questions and answers