CENTER PANEL
Idle, Stop & Go (ISG) System
The ISG system is designed to help reduce fuel consumption by automatically shutting
down the engine when the vehicle is at a standstill.
When the ISG system is ON and the vehicle is at a standstill, the engine will stop, and
the green AUTO STOP indicator
The engine will restart when the brake pedal is released or the shift lever is moved from
D (Drive) to the R (Reverse) position or to Manual Shift mode. When engine restarts, the
green AUTO STOP indicator on the instrument cluster will turn off.
To deactivate the ISG System, press the ISG OFF button
system will be activated.
•
QUICK TIPS
•
The ISG system will not activate when:
– A seat belt is unfastened
– The hood or a door is opened
– Battery condition is not adequate
– The front or rear defroster is turned on
– Engine coolant temperature is low
– The outside ambient temperature is too low/high
– Emission control devices activate
– The vehicle is on a steep slope
See section 5 in the Owner's Manual for more information.
38
SELTOS
F E A T U R E S & F U N C T I O N S G U I D E
on the instrument cluster will illuminate green.
A
. If you press again, the
B
REMINDERS:
•
When the ISG system is on and the
vehicle is at a standstill, the engine
may not stop and the AUTO STOP
indicator on the instrument cluster
will illuminate YELLOW. This indicates
the system is functional but not all
enabling criteria have been met.
•
ISG is active by default at vehicle
startup. When ignition is cycled, ISG
will turn ON again
• Under certain conditions, the engine
will restart automatically even if the
brake pedal is still depressed
• If the AUTO STOP indicator
continuously blinking yellow and the
ISG button LED is on, please contact
an authorized Kia dealer
(Cluster B shown)
(Buttons located on left of Steering Wheel)
is
QR CODES
Idle, Stop & Go (ISG)
Video
A
Refer to the inside front cover for
more information on QR codes.
www.youtube.com/KiaFeatureVideos
B
*IF EQUIPPED
Need help?
Do you have a question about the SELTOS and is the answer not in the manual?
Questions and answers