Jedo Trim User Manual page 11

WARNING! When putting on the material of
the seat, pay attention that the retaining
elastic bands do not get into the backrest
folding mechanism (Photo no.23 A, B).
18. HANDLE HEIGHT ADJUSTMENT
Simultaneously press the two buttons on
both sides of the inside of the handle and
move the handle to increase or decrease
its height accordingly (Photo no.24).
19. DISASSEMBLY OF THE TROLLEY
WARNING! In order to collapse the chas-
sis, remove the carry cot or seat and the
basket and set the handle in a position
adjoining to the aluminum frame. (Photo
no.25).
WARNING! Stroller must always be col-
lapsed with the front wheels unlocked.
Next, fold the rack by pressing the two
buttons on the plastic handles (Photo
no.26), located on the handle of the
stroller.
After unlocking the collapsing mechanism,
pull the handles toward each other and
move the lever to the front.
In order to further reduce the size of the
stroller before starting the collapsing pro-
cedure, remove the wheels and fenders.
To remove the fenders, pull them up-
wards. To reassemble them, insert them
into the plastic components for fenders'
mounting (Photo no.27).
20. RAIN COVER
The stroller is equipped with a rainproof
cover with vents, for both the carry cot
and the seat. To mount it, slide one end
onto to the cupola, and the other onto
the carry cot (from the side of the lever).
21. MOSQUITO NET
The carry cot and the seat are equipped
with a mosquito net; to mount it, slide
one end (marked INSERT) onto the cupola
and attach it with press-studs located on
both sides, then hook the other end of
the mosquito net to the carry cot or the
footrest of the seat.
22. CAR SEAT INSTALLATION
The stroller is also manufactured in a ver-
sion with a car seat, for children weighing
from 0 to 13 kg. In order to install the car
seat, first put the adapters on the stroller
chassis, plugging them identically as for
the carry cot, then mount the seat on the
adapter. It plugs in automatically.
WARNING! Before using the seat, make
sure that the adapters are properly
mounted.
In order to unplug the adapters, press the
button on the side of the seat, repeat for
the other side.
WARNING!
The car seat, used together with the
chassis, does not replace a crib or bed;
should the child needed to sleep, it is
recommended to place it in a proper
carry cot, crib or bed.
user manual | EN
Using proper manufacturer adapters, the
TRIM stroller may be used with the fol-
lowing seats:
1. The M Adapter
• Maxi-Cosi: Cabriofix, Citi, Pebble
• Cybex: Aton 3, Aton 4, CBX
• Kiddy: Evolution Pro2, Evo-Lunafix
• Safety 1st: Mimas
• Recaro: Privia
• Avionaut: Ultralite, Kite
2. The R Adapter
• Römer: Baby Safe Plus,
Baby Safe Plus SHR II
23. BASKET INSTALLATION / REMOVAL
To remove the basket, gently lift and re-
move it from the rack. To reassemble the
basket, place it on the 4 plastic pins lo-
cated on the frame (Photo no.28). Basket
can be folded for transport, by collapsing
the bottom of the basket.
user manual | EN