Contents 1 Important safety instructions Hearing Safety General information 2 Your Bluetooth in-ear headphones What's in the box Other devices Overview of your Bluetooth in-ear headphones 3 Get started Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music...
1 Important safety General information instructions To avoid damage or malfunction: Caution • Do not expose headphones to excessive heat. • Hearing Safety Do not drop your headphones. • Headphones shall not be exposed to dripping or splashing. • Do not allow your headphones to be submerged in water.
Bluetooth and is compatible to the headphones (see 'Technical data' on page 7). Congratulations on your purchase, and Overview of your Bluetooth welcome to Philips! To fully benefit from the support that Philips offers, register your product in-ear headphones at www.philips.com/welcome.
Finish your call before charging the headphones, as Activate the Bluetooth feature of your connecting the headphones for charging will power the mobile phone, select Philips SHB5950. headphones off. Enter the headset password "0000" (4 Connect the supplied USB charging cable to: zeros) if prompted.
4 Use your Turn the Music/ Press and hold for 4 headphones call seconds. headphones off. control » The white LED is on and fades out. Connect the headphones to a Music control Bluetooth device Task Button Operation Play or pause Music/call Press once.
Page 8
The headphones are The blue LED flashes on but not connected quickly. to a Bluetooth device. If no connection can be made, the headphones will turn itself off within 5 minutes. Low battery level. The white LED flashes 3 times for every 10 seconds until it is out of power.
5 Technical data • Up to 7 hours of music time or 7 hours of talk time • Up to 160 hours of standby time • Normal time for a full charge: 2 hours • Rechargeable lithium polymer battery (120 mAh) •...
Gibson Innovations may void the FCC and with 21 CFR 1040.10. Operation is subject authorization to operate this equipment. to the following two conditions: Model number: SHB5950 a This device may not cause harmful Trade Name: Philips interference, and Responsible party: Gibson Innovations USA Inc.3070 Windward Plaza Suite F, Box 735...
For disposal or recycling information, please contact your local authorities or visit The Bluetooth word mark and logos are owned www.recycle.philips.com. by the Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations is under license. Remove the integrated...
Follow the steps described in this user manual (see 'Pair the headphones with For further support, visit your mobile phone' on page 4). www.philips.com/support. • Make sure that the LED light flashes blue and white alternately before you release the call/music button. Do not stop holding the button if you see the blue LED only.
Page 14
Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. UM_SHB5950_27_EN_V1.0 wk1552...