Operating the TV
Tuning in satellite TV
For convenience your 320TRS-v2 Comes with a
default channel list from first switch on, you are able to
edit and sor t this list to your own personal preference. If
any fur ther channels are required then you must star t a
full scan.
At first installation to download the default list please
Select "Channel" and press OK when Auto tuning is
highlighted
CHANNEL
Auto Tuning
DVB-S Manual Tuning
Programme EDIT
Satellite Edit
Signal Information
CI Information
5V antenna power
Software Update(USB)
Select
Set
A new display will be presented
Please ensure scan mode is set to Preset and press OK
Satellite
(1/65)Ku_ASTRA 2E,2F,2G
Channel Type
All
Service Type
All
Scan Mode
Preset
Unicable
off
DiSEqC1.0
off
DiSEqC1.1
off
15
off
Return
MENU
Exit
MENU
Press MENU and select Channel, highlight Auto Tuning
and press OK. Select the wanted satellite
(default is Astra 28.2).
When presented with the menu below, press OK to
start tuning scan.
Satellite
(3/65)Ku_ASTRA 2E,2F,2G
Channel Type
All
Service Type
All
Scan Mode
Auto
Unicable
off
DiSEqC1.0
off
DiSEqC1.1
off
A scan will locate all new services on the selected satellite and
add after the default channel list.
Do you want to start satellite
Autoscan?
Yes
No
Any new/wanted channels can now be edited/sorted to the
users desired preferance, please refer to page 20 for channel
edit feature.
Need help?
Do you have a question about the L320TRS-v2 and is the answer not in the manual?
Questions and answers