Advertisement
Quick Links
• Instructions in this Setup Guide show the iPF770 printer. Note that your printer may look different from these illustrations in some cases.
Caution
Introduction
Overview of Setup
When using the optional stand, the stand needs to be assembled first.
Refer to the Stand Setup Guide included with the stand for details on how
to assemble the stand.
Preparations
Install the Ink Tanks
Install the Printhead
Install the Software
How to Display the Electronic
Manuals
Details for each step are given in this Setup Guide. Simply follow the instructions to
install the printer.
If an error message is displayed during setup or other problems occur, refer to
"Responding to Messages" on page 6.
Preparations
Prepare to use the printer such as by connecting the power cord.
1
Have 3 or more people grasp the printer carrying handles and place the printer on a flat location
such as a table where it will be used.
• When moving the printer, always have 3
or more people firmly grasp the carrying
Important
handles.
Holding the printer at other positions is
dangerous, and may cause injury and
damage if the printer is dropped.
QT6-2153-V01
XXXXXXXX
A space larger than the following dimensions needs to be allocated when
setting up this printer.
* The optional "Printer Stand ST-27" can be used with the iPF670E/iPF671E.
(P.1)
(P.2)
(P.3)
(P.4)
(P.5)
a. Printer
b. Roll holder: Already attached to printer
c. Starter ink tanks (for first-time
d. Printhead
• The way to set the printer down or to carry
with the load only to the center of the printer,
may cause damage to the printer.
1
© CANON INC. 2016
Read this manual before attempting to operate the printer.
Keep this manual in a handy location for future reference.
Space Required for Installation
Printer only
With stand(*) mounted
Package Contents
c
e
b
a
installation) C, M, Y, MBK x2, BK
2
Remove the orange tape used to secure
the roll holder to the printer.
3
Plug the power cord into the power supply
connector on the right of the printer and
plug the other end into the outlet.
PRINTED IN XXXXXXXX
ENG
Installation space (W x D x H mm)
1397 × 1308 × 807
1397 × 1700 × 1362
d
f
g
e. Cautions When Using the iPF670E/
iPF671E, Setup Guide (this document)
f. CD-ROM (for Windows 64-bit)
g. Power cord
Advertisement
Related Manuals for Canon imagePROGRAF iPF670E
Summary of Contents for Canon imagePROGRAF iPF670E
- Page 1 Plug the power cord into the power supply connector on the right of the printer and plug the other end into the outlet. QT6-2153-V01 XXXXXXXX © CANON INC. 2016 PRINTED IN XXXXXXXX...
-
Page 2: Install The Ink Tanks
Install the Ink Tanks Install the 6 ink tanks by following the guidance displayed on the printer display. Press the power button to turn on the Select your language and time zone. Instructions on ink tank installation printer. Use the ▲ and ▼ keys to select and are shown on the display screen. -
Page 3: Install The Printhead
Install the Printhead Install the printhead by following the guidance displayed on the printer display. Open Upper Cover is shown on the Pull the printhead fixer lever forward all • When installing the printhead, do not display screen. As instructed, open the the way to open it completely. -
Page 4: Install The Software
For Windows (32-bit) and Mac OS The software is not included. Download and install the necessary software from the Canon website. Cautions When Connecting the Printer Connect the computer and printer during installation or after installation of the The screen on the right may be printer driver. - Page 5 The following shows how to display the manuals on the website. Click the User Manual button in the Support sheet of software such as the printer driver (User's Guide, Paper Reference Guide only) Download from the Canon website (excluding Paper Reference Guide)
-
Page 6: Responding To Messages
(See steps 3-4 and 7-9 on page 2) (where x is 0, 1, or 2) If the same message is displayed again, write down the error code and message, turn off the printer, and contact your Canon dealer for assistance. Hardware error.