Loading Continuous Paper Onto The Front Push Tractor - Epson FX-980 Quick Reference Manual

Loading Continuous Paper Onto the Front Push Tractor

To load continuous paper onto the front push tractor, follow these steps:
Note:
To use the front push tractor, install the tractor unit in the front position and load continuous paper in
the front slot.
1
Open the front paper guide by pulling the
tab in the center. Remove the guide by
grasping both sides and pulling it straight
out of the printer.
Q
To feed continuous paper to the standby
position where you can remove it easily,
press the Load/Eject button.
4
2
Open both sprocket covers and fit the first
three holes of the paper, printable side up,
over the tractor pins. Then close the
sprocket covers.
Note:
Load continuous paper that has a clean, straight
edge to avoid paper jams.
Q
When you load continuous paper of a
different size or thickness, adjust the position
of the sprockets or change the paper
thickness lever setting. See Chapter 2 of the
User's Guide for instructions.