Troubleshooting - Coredy L900 Owner's Manual

Table of Contents

Advertisement

5 Troubleshooting

Problems
Solutions
Make sure Coredy L900 Robot is connected to a power source.
Coredy L900 Robot
Make sure the battery is fully charged.
cannot be activated.
If you still have trouble, reset the Coredy L900 Robot (refer to the "Using Your Coredy L900 Robot > Reset
the System" section in this manual).
Coredy L900 Robot
Check if Coredy L900 Robot is trapped or stuck on an obstacle.
suddenly stops
Check if the battery level is too low.
working.
If you still have trouble, turn off Coredy L900 Robot, wait for 3 seconds, and then turn it back on.
Make sure Coredy L900 Robot is turned on.
You can set the time of day and scheduled cleaning time via the Coredy Robot App.
You cannot schedule
Make sure the scheduled time has been set correctly.
cleanings.
Check if Coredy L900 Robot's power is too low to start cleaning.
Coredy L900 Robot will not start a scheduled cleaning while already performing a task.
Check if any obstructions are blocking the suction inlet.
Empty the dust collector.
Suction power is
Clean the filter with water.
weak.
Check if the filter is wet due to water or other liquid on the floor. Air-dry the filter completely before use.
Check if the indicator on the Charging Dock lights up (when Coredy L900 Robot is not on the Charging
Dock). If not, contact the Coredy service center to repair or replace the Charging Dock.
Coredy L900 Robot
Check if the indicator on the Charging Dock is off and the light on the main unit is breathing during charging.
cannot be charged.
Dust off the charging contact pins with a dry cloth.
Remove objects within 1.6 ft/0.5 m to the left and right side and within 4.9 ft/1.5 m of the front of the Charging Dock.
Make sure Coredy L900 Robot started cleaning from the Charging Dock and has not been moved during cleaning.
Coredy L900 Robot
When Coredy L900 Robot is in the vicinity of the Charging Dock, it will return more quickly. However, if the
cannot return to the
Charging Dock is located far away, Coredy L900 Robot will need more time to return. Please be patient as it works
Charging Dock.
its way back.
Clean the charging contact pins.
32

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L900 and is the answer not in the manual?

Questions and answers

Kathie
March 24, 2025

My L900 says it’s 100% charges, when I select start in the app, it starts then almost immediately stops and all lights go out. It does not make it off the charger.

1 comments:
Mr. Anderson
March 24, 2025

The Coredy L900 may start and then stop immediately without leaving the charger if the Charging Dock is inaccessible. In this case, the robot will not be able to recharge properly. The solution is to manually place the robot on the Charging Dock for charging.

This answer is automatically generated

Table of Contents

Save PDF