Factory Reset, Clearing All Memory - Sharp HP-BC50 Operation Manual

Troubleshooting chart (continued)
Problem
Cause
Description
The unit The unit did not enter the pairing
cannot be state.
searched or
pairing fails.
The Bluetooth application of the
smartphone is in error.
Note:
Do not use chemical/oil to clean the charging terminal point.
„ Factory reset, clearing all memory
To reset the unit, press LEFT and RIGHT button simultaneously for 5 seconds. Red
and blue indicators light up alternately and the unit will enter pairing mode.
Solution
During
LEFT
simultaneously for 5 seconds to
enter pairing mode.
Turn off the smartphone and
start again to pair with the unit.
E-16
power on,
and RIGHT
press
button