Panasonic AV-HS04M6 Operating Instructions Manual page 10

Name of each part
SW501
Switch No.
1
Y/C separation mode
(INPUT5, 7)
2
3
Y/C separation mode
(INPUT6, 8)
4
5 NTSC setup
6
7 Reserved
8
Y/C separation mode setting:
Set the priority mode when separating the video signals into Y and C signals.
NTSC setup setting:
When the NTSC video signals are input, set whether the input signal is setup on
(black level: 7.5 IRE) or setup off (black level: 0 IRE).
Reserve:
Use in the OFF position (factory default).
Off
1: Off, 2: Off Standard (recommended)
1: On, 2: Off Movie priority
1: Off, 2: On Noise priority
1: On, 2: On Standard (recommended)
3: Off, 4: Off Standard (recommended)
3: On, 4: Off Movie priority
3: Off, 4: On Noise priority
3: On, 4: On Standard (recommended)
Off
—
—
—
9 (E)
On Factory setting
On
—
—
—
Off
Off
Off
Off
Off
Off
Off
Off