Making A Quick Copy; Printing From A Memory Card; Inserting The Memory Card - Epson Stylus CX7000 Quick Manual

Epson stylus cx7000: product information
Hide thumbs Also See for Stylus CX7000:
Table of Contents

Advertisement

5. If you want borderless photos
(printed without a white
border), press the
Copy
again to select
Fit to Page
mode. (If you select
100%
photos are printed with a
border.) The display changes to
this:
6. To make multiple copies (up to 99), press the number keys
on the numeric keypad. The display shows the number you
select.
Note:
To exit Copy mode, press the
7. Press the paper type button to select
8. Press the paper size button to select
.
5"× 7"
9. To make a color copy, press the x
To make a black and white copy, press the x
button.
appears on the display and the CX7000F Series starts
Printing
copying.
If you need to stop copying, just press the y
button. Do not pull out paper that is being printed; it will be
ejected automatically to the output tray.
Note:
The copies may not be exactly the same size as the original.
When making a lot of copies, it is a good idea to remove the printed
copies from the output tray after every 10 sheets or so.
button
,
Copies:1 FitPage
y
Cancel/Back
button.
.
Photo Paper
,
, or
Letter
4"× 6"
Start Color/OK
Start B&W
Cancel/Back

Making a Quick Copy

If you want to make a copy quickly and do not need high
quality, you can print a "draft" copy. The print quality is
reduced, but the copy is printed faster.
1. Load plain, letter-size paper and select
size on the control panel.
Letter
2. Press the
automatically reduced or enlarged to fit the loaded paper
size, press the
mode.
3. When you are ready to copy, press and hold the y
button, then press and hold the x
Back
button (to copy in color). When you see
on the display, release both buttons.
the display.
To make a black and white copy, press and hold the
button.
y
Cancel/Back
button. When you see
B&W
display, release both buttons.
display.

Printing From a Memory Card

Inserting the Memory Card

1. Make sure the CX7000F Series is turned on.
2. Open the memory card door.
3. Make sure the memory card access light is off and that no
cards are in any of the slots. Then insert your card into the
correct slot. The memory card access light flashes and then
stays on.
Left slot
10/06
Epson Stylus CX7000F Series
button. If you want your copies
Copy
button again to select
Copy
button, then press and hold the x
B/W Draft Mode
Printing
Insert just one card at a time
Right slot
Memory card
access light
and
Plain Paper
Fit to Page
Cancel/
Start Color/OK
Color Draft Mode
appears on
Printing
Start
on the
appears on the
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus cx7000f series

Table of Contents