Lcd Panel Safety Instructions - Epson Stylus CX5400 User Manual

Do not put your hand inside the Stylus CX5400 or touch the cartridge during
printing.
Do not move the print head by hand; otherwise you may damage the
Stylus CX5400.
Install the ink cartridge immediately after you remove it from its package. Leaving
the cartridge unpacked for a long time before use may result in reduced print
quality.
Do not use an ink cartridge beyond the date printed on the cartridge package. For
best results, use up the ink cartridges within six months of first installing them.
Store ink cartridges in a cool, dark place. Store each ink cartridge so that the
bottom of its package faces down.
After bringing an ink cartridge inside from a cold storage site, allow it to warm up
at room temperature for at least three hours before using it.
Do not remove or tear the label on an ink cartridge; this can cause leakage.
Do not dismantle the ink cartridges or try to refill them. This could result in
damage to the print head.
Do not touch the green IC chip on the side of the cartridge. This may affect
normal operation and printing.
If you remove an ink cartridge for later use, protect the ink supply area from dirt
and dust and store it in the same environment as the Stylus CX5400. Note that
there is a valve in the ink supply port, making covers or plugs unnecessary, but
care is needed to prevent the ink from staining items that the cartridge touches.
Do not touch the ink cartridge ink supply port or surrounding area.

LCD Panel Safety Instructions

Use only a dry soft cloth to clean the LCD display. Don't use liquid or chemical
cleaners.
If the LCD display is damaged, contact your dealer.
If LCD solution gets on your skin, wash it off thoroughly with soap and water. If
it gets in your eyes, flush them immediately with water.
101