Heatwave Sonoma 4 Person Hemlock Carbon Sauna Owner's Manual page 9

ASSEMBLY INSTRUCTIONS (CONT.)
13. Remove the back cover of the OXYGEN IONIZER by turning it as indicated. Unwrap and
install the fragrance patch, then reattach the back cover. Attach the OXYGEN IONIZER in the
designated position with (2) 3/4" SCREWS. Plug the power cable into the OXYGEN IONIZER.
Note: Press ION to release negatively charged ions to purify the air & press O3 to disinfect the air with ozone.
14. Attach the TOWEL BAR with (2) 1-1/8" SCREWS and the MAGAZINE RACK with (4) 1-1/2"
SCREWS on the back of the door as shown. Note: attaching these items is optional, but if you do,
consider the position carefully before driving any screws into the sauna interior.
15. Plug the main power cable into a dedicated outlet. Note: No other appliances should share
the same outlet or circuit with this sauna.
CONGRATULATIONS!
The assembly of your sauna is now complete.
Please review the Operation Instructions and Health & Safety warnings before using your sauna.
To ensure years of trouble-free use, follow the Cleaning & Maintenance guidelines carefully.
9