Lenovo ideapad 100 Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Laptop
  5. ideapad 100
  6. Hardware maintenance manual

Lenovo ideapad 100 Hardware Maintenance Manual

Hide thumbs Also See for ideapad 100:
Table of Contents

Advertisement

Quick Links

Download this manual
Lenovo ideapad 100
ideapad 100-14IBD
Hardware
Maintenance
Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ideapad 100 and is the answer not in the manual?

Questions and answers

Related Manuals for Lenovo ideapad 100

Summary of Contents for Lenovo ideapad 100

  • Page 1 Lenovo ideapad 100 ideapad 100-14IBD Hardware Maintenance Manual...
  • Page 2 Note: • Before using this information and the product it supports, be sure to read the general information under “Notices” on page 70. First Edition (Sep. 2015) © Copyright Lenovo 2015. All rights reserved. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925. © 2015 Lenovo...

  • Page 3: Table Of Contents

    Power-on password ..........24 Hard-disk password ..........24 Administrator password ........24 Power management ........25 Screen blank state ..........25 Putting the computer to sleep or shutting it down ..............25 Putting your computer to sleep ......25 Shutting down the computer ......25 Lenovo ideapad 100-14IBD ......26 Specifications ..........26 Status indicators ........... 28 Fn key combinations/Hotkeys....... 29 FRU replacement notices ......30 Screw notices ..........30 Removing and replacing an FRU ....31 1010 Keyboard ..........32 1020 Optical drive ..........34 1030 Base cover and Battery pack .

  • Page 4: About This Manual

    • The product-specific section includes service, reference, and product-specific parts information. Important: This manual is intended only for trained servicers who are familiar with Lenovo products. Use this manual to troubleshoot problems effectively. Before servicing a Lenovo product, make sure to read all the information under “Safety information” on page 1 and “Important service information” on page 16.

  • Page 5: Safety Information

    Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service a Lenovo ideapad 100-14IBD computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 • “Handling devices that are sensitive to electrostatic discharge” on page 6 • “Grounding requirements” on page 6 • “Safety notices: multilingual translations” on page 7 • “Laser compliance statement” on page 14...

  • Page 6: General Safety

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift it. 4. Lift it by standing or pushing up with your leg muscles; this action could avoid the strain from the muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35 lb) or that you think is too heavy for you. • Do not perform any action that causes hazards to the customer, or that makes the machine unsafe.

  • Page 7: Electrical Safety

    Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their machines that contain small conductive fibers to decrease electrostatic discharges.
  • Page 8 Lenovo ideapad 100-14IBD Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage. • Do not service the following parts with the power on when they are removed from their normal operating places in a machine: – Power supply units – Pumps – Blowers and fans – Motor generators and similar units. (This practice ensures correct grounding of the units.) • If an electrical accident occurs: – Caution: do not become a victim yourself.

  • Page 9: Safety Inspection Guide

    The power cord should be the type specified in the parts list. c. Insulation must not be frayed or worn. 4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage. 8. Check for worn, frayed, or pinched cables.

  • Page 10: Handling Devices That Are Sensitive To Electrostatic Discharge

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. Notes: 1. Use product-specific ESD procedures when they exceed the requirements noted here.

  • Page 11: Safety Notices: Multilingual Translations

    Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer.
  • Page 12 Lenovo ideapad 100-14IBD Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short- circuit it. Dispose of the battery as required by local ordinances or regulations.
  • Page 13 Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack.
  • Page 14 Lenovo ideapad 100-14IBD Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations.
  • Page 15 Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing. Si le panneau d’affichage à...
  • Page 16 Lenovo ideapad 100-14IBD Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation.
  • Page 17 Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.

  • Page 18: Laser Compliance Statement

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products. Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN 60 825 for Class 1 laser products.
  • Page 19 Safety information A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe diretamente por meio de instrumentos óticos e evite exposição direta com o feixe de luz.

  • Page 20: Important Service Information

    Strategy for replacing FRUs Before replacing parts: Make sure that all software fixes, drivers, and BIOS downloads are installed before replacing any FRUs listed in this manual. After a system board is replaced, ensure that the latest BIOS is loaded to the system board before completing the service action. To download software fixes, drivers, and BIOS, follow the steps below: 1. Go to http://support.lenovo.com. 2. Enter the serial number or select a product or use Lenovo smart downloading. 3. Select the BIOS/Driver/Applications and download. 4. Follow the directions on the screen and install the necessary software.

  • Page 21: Strategy For Replacing A Hard Disk Drive

    Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. • Some computers have both a processor board and a system board. If you are instructed to replace either of them, and replacing one of them does not solve the problem, reinstall that board, and then replace the other one. • If an adapter or a device consists of more than one FRU, any of the FRUs may be the cause of the error. Before replacing the adapter or device, remove the FRUs one by one to see if the symptoms change. Replace only the FRU that changed the symptoms. Attention: The setup configuration on the computer you are servicing may have been customized. Running Automatic Configuration may alter the settings. Note the current configuration settings (using the View Configuration option); then, when service has been completed, verify that those settings remain in effect.

  • Page 22: Important Information About Replacing Rohs Compliant Frus

    Note: RoHS and non-RoHS FRU part numbers with the same fit and function are identified with unique FRU part numbers. Lenovo plans to transit to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s requirements and schedule in the EU. Products sold in 2005 and 2006 will contain some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo produces containing RoHS compliant FRUs.

  • Page 23: General Checkout

    General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: • Only certified trained personnel can service the computer. • Before replacing any FRU, read the entire page on removing and replacing FRUs. • Carefully remove screws for reuse when replacing FRUs. • Be extremely careful during such write operations as copying, saving, or formatting. Drives in the computer that you are servicing sequence might have been altered.

  • Page 24: What To Do First

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2. Date of service 3. Date on which the machine failed 4. Date of purchase 5. Procedure index and page number in which the failing FRU was detected 6. Failing FRU name and part number 7. Machine type, model number, and serial number 8. Customer’s name and address Note for warranty: During the warranty period, the customer may be responsible for repair costs if the computer damage was caused by misuse, accident, modification, unsuitable physical or operating environment, or improper maintenance by the customer.

  • Page 25: Power System Checkout

    • If the computer does not charge during operation, go to “Checking operational charging”. To check the AC adapter, follow the steps below: 1. Unplug the AC adapter cable from the computer. 2. Measure the output voltage at the plug of the AC adapter cable. See the following figure: Voltage (V DC) Note: Output voltage for the AC adapter pin No. 2 may differ from the one you are servicing. 3. If the voltage is not correct, replace the AC adapter. 4. If the voltage is acceptable, do the following: • Replace the system board. • If the problem persists, go to “Lenovo ideapad 100-14IBD” on page 26. Note: Noise from the AC adapter does not always indicate a defect.

  • Page 26: Checking Operational Charging

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual Checking operational charging To check whether the battery charges properly during operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer. Perform operational charging. If the battery status indicator or icon does not light on, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator or icon is still off, replace the battery pack. If the charge indicator still does not light on, replace the system board. Then reinstall the battery pack. If it is still not charged, go to the next section. Checking the battery pack Battery charging does not start until the Power Meter shows that less than 95% of the total power remains; under this condition the battery pack can charge to...

  • Page 27: Related Service Information

    Recovery. For details of OneKey Recovery System, see the User Guide for Lenovo OneKey Recovery System . Note: This will delete all the new data on the system partition (C drive), which is not recoverable. Make sure to back up your critical data before you perform this...

  • Page 28: Passwords

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual Passwords As many as three passwords may be needed for any Lenovo computer: the power-on password (POP), the hard disk password (HDP), and the administrator password. If any of these passwords has been set, a prompt for it appears on the screen whenever the computer is turned on. The computer does not start until the password is entered.

  • Page 29: Power Management

    Related service information Power management Note: Power management modes are not supported for APM operating system. To reduce power consumption, the computer has three power management modes: screen blank, sleep (standby), and shut down. Screen blank state If the time set on the “Turn off monitor” timer in the operating system expires, the LCD backlight turns off. You can also turn off the LCD backlight by pressing To end screen blank state and resume normal operation, press any key. Putting the computer to sleep or shutting it down When you have finished working with your computer, you can put it to sleep or shut it down.

  • Page 30: Lenovo Ideapad 100-14Ibd

    • “FRU replacement notices” on page 30 • “Removing and replacing an FRU” on page 31 • “Locations” on page 56 • “Parts list” on page 58 Specifications The following table lists the specifications of the Lenovo ideapad 100-14IBD: Table 1. Specifications Feature Description Processor •...
  • Page 31 Lenovo ideapad 100-14IBD Table 1. Specifications (continued) Feature Description Ethernet (on the • 10/100 Mbps system board) Bluetooth • Bluetooth Optional wireless Keyboard • 6 rows Lenovo Frame Keyboard Integrated • 0.3 M camera Battery • Li-Cylinder, 4 cells, 32 Wh AC adapter • 20 V, 65 W / 45 W Pre-installed • Win 10 64bits operating • Free-DOS system...

  • Page 32: Status Indicators

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual Status indicators The system status indicators below show the computer status: Table 2. Status indicators Indicator Charge Indicator Meaning status status On (solid white) The computer is powered on. Power Blinking The computer is in sleep mode. The computer is powered off. Charging The battery has more than 80% charge. On (solid white) Discharging The battery has more than 20% charge. The battery has between 5% and 20% On (solid amber) Discharging charge. The battery has between 20% and 80% charge. When the battery reaches 80% Blinking slowly Charging charge, the light will stop blinking. Battery...

  • Page 33: Fn Key Combinations/Hotkeys

    Lenovo ideapad 100-14IBD Fn key combinations/Hotkeys The following table shows the function of each combination of Fn with a function key. Table 3. Fn key combinations Fn + Home: Activates the pause function. Fn + End: Activates the break function. You can access certain system settings quickly by pressing the appropriate hotkeys.

  • Page 34: Fru Replacement Notices

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual FRU replacement notices This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon-coated screws that have the following characteristics: • They maintain tight connections. • They do not easily come loose, even with shock or vibration.

  • Page 35: Removing And Replacing An Fru

    Lenovo ideapad 100-14IBD Removing and replacing an FRU This section presents exploded figures with the instructions to indicate how to remove and replace the FRU. Make sure to observe the following general rules: 1. Do not attempt to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts. 2. Before replacing any FRU, review “FRU replacement notices” on page 30. 3. Begin by removing any FRUs that have to be removed before the failing FRU. Any of such FRUs are listed at the top of the page. Remove them in the order in which they are listed. 4. Follow the correct sequence in the steps to remove the FRU, as given in the figures by the numbers in square callouts. 5. When turning a screw to replace an FRU, turn it in the direction as given by the arrow in the figure. 6. When removing the FRU, move it in the direction as given by the arrow in the figure.

  • Page 36: 1010 Keyboard

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual 1010 Keyboard Figure 1. Removal steps of keyboard Remove the screws 1. Step Screw (quantity) Color Torque M2 × 6 mm, Phillips head, nylok-coated (3) Black 1.85+/-0.15 kgf*cm D cover → Key Board Push the keyboard with a thimble (or similar object without a sharp tip) through the screw hole on the back cover 2. Loosen the keyboard with fingers in the direction shown by arrow 3.
  • Page 37 Lenovo ideapad 100-14IBD Figure 1. Removal steps of keyboard (continued) Lift the keyboard slightly 4 and detach the keyboard connector in the directions shown by arrows 5 and 6. Then remove the keyboard. When installing: Make sure that the connector is attached firmly.

  • Page 38: 1020 Optical Drive

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual 1020 Optical drive Figure 2. Removal steps of optical drive Remove the screw 1, then gently pull the optical drive out in the direction shown by arrow 2. Step Screw (quantity) Color Torque M2 × 6 mm, Phillips head, nylok-coated (1) Black 1.85+/-0.15 kgf*cm...

  • Page 39: 1030 Base Cover And Battery Pack

    Lenovo ideapad 100-14IBD 1030 Base cover and Battery pack For access, remove these FRUs in order: • “1010 Keyboard” on page 32 • “1020 Optical drive” on page 34 DANGER Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode. Figure 3. Removal steps of base cover and battery pack Detach the battery pack connector in the direction shown by arrow When installing: Make sure that the battery connector is attached firmly.
  • Page 40 Lenovo ideapad 100-14IBD Hardware Maintenance Manual Figure 3. Removal steps of base cover and battery pack (continued) Remove the screws 2 from the bottom. Step Screw (quantity) Color Torque M2 × 6 mm, Phillips head, nylok-coated (9) Black 1.85+/-0.15 kgf*cm D cover → C cover Use a plastic prying tool to aid in separation, then remove the base cover in the directions shown by arrows 3 and 4.
  • Page 41 Lenovo ideapad 100-14IBD Figure 3. Removal steps of base cover and battery pack (continued) Remove the screws 5. Step Screw (quantity) Color Torque M2 × 6 mm, Phillips head, nylok-coated (2) Black 1.85+/-0.15 kgf*cm Battery → D cover Remove the battery pack in the direction shown by arrow 6.
  • Page 42 Lenovo ideapad 100-14IBD Hardware Maintenance Manual Note: Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following...

  • Page 43: 1040 Hard Disk Drive

    Lenovo ideapad 100-14IBD 1040 Hard disk drive For access, remove these FRUs in order: • “1010 Keyboard” on page 32 • “1020 Optical drive” on page 34 • “1030 Base cover and Battery pack” on page 35 Attention: • Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. • Before removing the drive, suggest the customer to backup all the information on it if possible.
  • Page 44 Lenovo ideapad 100-14IBD Hardware Maintenance Manual Figure 4. Removal steps of hard disk drive (continued) Remove the screws 3, and then take out the metal frame. Step Screw (quantity) Color Torque M3 × 3 mm, Phillips head, nylok-coated (4) Silver 3.0+/-0.3 kgf*cm HDD → HDD bracket...

  • Page 45: 1050 Pci Express Mini Card For Wireless Lan

    FCC and IC regulations. Refer to “Table 5. Parts list—Overall” on page 60 for Lenovo part numbers for the approved modules. Figure 5. Removal steps of PCI Express Mini Card for wireless LAN Disconnect the two wireless LAN cables (black, grey) 1, and then remove the screw 2.
  • Page 46 Lenovo ideapad 100-14IBD Hardware Maintenance Manual Figure 5. Removal steps of PCI Express Mini Card for wireless LAN (continued) Remove the card in the direction shown by arrow 3. When installing: • In models with a wireless LAN card that has two antenna connectors, plug the black cable (1st) (MAIN) into the jack labeled MAIN, and the grey cable (2nd) (AUX) into the jack labeled AUX on the card.

  • Page 47: 1060 Dimm

    Lenovo ideapad 100-14IBD 1060 DIMM For access, remove these FRUs in order: • “1010 Keyboard” on page 32 • “1020 Optical drive” on page 34 • “1030 Base cover and Battery pack” on page 35 Figure 6. Removal steps of DIMM...

  • Page 48: 1070 Thermal Module

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual 1070 Thermal module For access, remove these FRUs in order: • “1010 Keyboard” on page 32 • “1020 Optical drive” on page 34 • “1030 Base cover and Battery pack” on page 35 Figure 7. Removal steps of thermal module Unplug the fan connector in the direction shown by arrow 1, then remove the screws 2 and 3. Step Screw (quantity) Color Torque M2 × 6 mm, Phillips head, nylok-coated (2) Black 1.85+/-0.15 kgf*cm Fan → C cover M2 × 3 mm, Phillips head, nylok-coated (4) Silver 1.85+/-0.15 kgf*cm Thermal → MB back plate(cpu/gpu BKT) When installing: Make sure that the fan connector is attached firmly.

  • Page 49: 1080 System Board

    Lenovo ideapad 100-14IBD 1080 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. • Avoid rough handling of any kind. • In the whole process, make sure not to drop or stack the system board. • If you put a system board down, make sure to put it only on a padded surface such as an ESD mat or conductive corrugated material. For access, remove these FRUs in order: • “1010 Keyboard”...
  • Page 50 Lenovo ideapad 100-14IBD Hardware Maintenance Manual Figure 8. Removal steps of system board (continued) Detach the three connectors in the directions shown by arrows 3. Remove the screws 4. Step Screw (quantity) Color Torque M2 × 3 mm, Phillips head, nylok-coated (2) Silver 1.85+/-0.15 kgf*cm MB → C cover When installing: Make sure that the connectors are attached firmly. Remove the system board in the direction shown by arrow 5.
  • Page 51 Lenovo ideapad 100-14IBD Figure 8. Removal steps of system board (continued) Remove the RTC battery in the direction shown by arrow 6.

  • Page 52: 1090 Upper Case

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual 1090 Upper case For access, remove these FRUs in order: • “1010 Keyboard” on page 32 • “1020 Optical drive” on page 34 • “1030 Base cover and Battery pack” on page 35 • “1040 Hard disk drive” on page 39 • “1050 PCI Express Mini Card for wireless LAN” on page 41 • “1070 Thermal module” on page 44 • “1080 System board” on page 45 Figure 9. Removal steps of upper case Remove the screws 1. Step Screw (quantity) Color Torque M2 × 6 mm, Phillips head, nylok-coated (4) Black 1.85+/-0.15 kgf*cm...
  • Page 53 Lenovo ideapad 100-14IBD Figure 9. Removal steps of upper case (continued) Release the cables from the cable guides in the directions shown by arrows 2, then open the hinge in the direction shown by arrows 3. When installing: Route the cables along the cable guides. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. Remove the upper case from LCD unit in the direction shown by arrow 4.

  • Page 54: 1100 Lcd Unit

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual 1100 LCD unit For access, remove these FRUs in order: • “1010 Keyboard” on page 32 • “1020 Optical drive” on page 34 • “1030 Base cover and Battery pack” on page 35 • “1040 Hard disk drive” on page 39 • “1050 PCI Express Mini Card for wireless LAN” on page 41 • “1070 Thermal module” on page 44 • “1080 System board” on page 45 • “1090 Upper case” on page 48 Figure 10. Removal steps of LCD unit Remove the LCD front bezel in the direction shown by arrows 1.
  • Page 55 Lenovo ideapad 100-14IBD Figure 10. Removal steps of LCD unit (continued) Remove the screws 2. Lift the LCD panel slightly 3. Peel off the adhesive tape and detach the connector in the direction shown by arrow 4. Then remove the LCD panel. Step...

  • Page 56: 1110 Lcd Hinges

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual 1110 LCD hinges For access, remove these FRUs in order: • “1010 Keyboard” on page 32 • “1020 Optical drive” on page 34 • “1030 Base cover and Battery pack” on page 35 • “1040 Hard disk drive” on page 39 • “1050 PCI Express Mini Card for wireless LAN” on page 41 • “1070 Thermal module” on page 44 • “1080 System board” on page 45 • “1090 Upper case” on page 48 • “1100 LCD unit” on page 50 Figure 11. Removal steps of LCD hinges Remove the screws 1. Step Screw (quantity) Color Torque M2.5 × 2.5 mm, Phillips head, nylok-coated (6)
  • Page 57 Lenovo ideapad 100-14IBD Figure 11. Removal steps of LCD hinges (continued) Release the two hinges in the direction shown by arrows 2.

  • Page 58: 1120 Edp Cable And Integrated Camera

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual 1120 EDP cable and integrated camera For access, remove these FRUs in order: • “1010 Keyboard” on page 32 • “1020 Optical drive” on page 34 • “1030 Base cover and Battery pack” on page 35 • “1040 Hard disk drive” on page 39 • “1050 PCI Express Mini Card for wireless LAN” on page 41 • “1070 Thermal module” on page 44 • “1080 System board” on page 45 • “1090 Upper case” on page 48 • “1100 LCD unit” on page 50 • “1110 LCD hinges” on page 52 Figure 12. Removal steps of EDP cable and integrated camera Note: The integrated camera is stuck on the top center of the LCD cover.
  • Page 59 Lenovo ideapad 100-14IBD Figure 12. Removal steps of EDP cable and integrated camera (continued) Remove the EDP cable in the direction shown by arrows 3.

  • Page 60: Locations

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual Locations Front and right-side view 1 Integrated camera 2 Wireless LAN antennas 3 Computer display 4 Speaker 5 Built-in microphone 6 System status indicators Note: For the description of each indicator, see “Status indicators” on page 28. 7 Touchpad 8 Optical drive 9 Kensington lock slot...

  • Page 61: Bottom And Left-Side View

    Lenovo ideapad 100-14IBD Bottom and left-side view 1 Memory card slot 2 Power button 3 Combo audio jack 4 USB ports 5 HDMI port 6 RJ-45 port 7 AC power adapter jack 8 Novo button 9 Ventilation slots J Louvers...

  • Page 62: Parts List

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual Parts list This section presents the following service parts: • “Overall” on page 59 • “LCD FRUs” on page 62 • “Keyboard” on page 64 • “Miscellaneous parts” on page 65 • “AC adapters” on page 65 • “Screws” on page 66 • “Power cords” on page 67 Note: Each FRU is available for all types or models, unless specific types or models are specified.

  • Page 63: Overall

    Lenovo ideapad 100-14IBD Overall...
  • Page 64 Lenovo ideapad 100-14IBD Hardware Maintenance Manual Table 5. Parts list—Overall No. FRU FRU no. CRU ID. a-c See “Miscellaneous parts” on page 65. LCD unit (see “LCD FRUs” on page 62.) Keyboard (see “Keyboard” on page 64.) Upper Cover L80RK W/SPEAKER...
  • Page 65 Lenovo ideapad 100-14IBD Table 5. Parts list—Overall (continued) No. FRU FRU no. CRU ID. MB L80RKV2G 3215UNOK 5B20K50549 MB L80RKUMA3215UNOK 5B20K50546 MB L80RKV2G i3-5020UNOK2G 5B20K50571 MB L80RKV2G i3-5020UNOK 5B20K50540 MB L80RKUMAi3-5020UNOK2G 5B20K50576 HDD, WD WD2500LPCX-24VHAT0 5H20J35763 HDD, ST500LT012 6G 7mm 5.4K 500G HDD...

  • Page 66: Lcd Frus

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual LCD FRUs In Lenovo ideapad 100-14IBD, there are following types of LCDs. • “14.0-in. HD LED”...
  • Page 67 Lenovo ideapad 100-14IBD Table 6. Parts list—LCD FRUs No. FRU FRU no. CRU ID. LCD BEZEL L80RK 5B30K50577 Panel, BOE HB140WX1-301 HD G F LED1 NB 18200939 Panel, IVO M140NWR4 R2 HD G F NB 5D10H34067 Panel, CMI N140BGE-EB3 C3 HD G S NB 5D10H13023 Panel, AU B140XTN03.4 4A HDT G F NB...

  • Page 68: Keyboard

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual Keyboard Table 7. Parts list—Keyboard Language CRU ID. English 5N20K69625 Greek 5N20K69626 International English 5N20K69612 Korean 5N20K69637 Traditional Chinese 5N20K69615 Russian 5N20K69620 Arabic 5N20K69607 Hebrew 5N20K69636 Thai 5N20K69635 Indian 5N20K69617 U.K. English 5N20K69622 Italian...

  • Page 69: Miscellaneous Parts

    Lenovo ideapad 100-14IBD Miscellaneous parts Table 8. Parts list—Miscellaneous parts CRU ID. System miscellaneous parts: • (a) ODD BRACKET L 100-15IBD 5B40K25389 • (b) ODD BEZEL L80RK 5B30K50566 • (c) HDDBRACKET L100IBD 7mm 5B40K41693 • (c) HDDBRACKET L100IBD9.5 mm 5B40K41694 Note: Italicized letters in parentheses are references to the exploded view in “Overall” on page 59. AC adapters Table 9. Parts list—AC adapters CRU ID. Delta ADP-45DW AA 20V2.25A adapter 5A10H43620 Delta ADP-45DW JA 20V2.25A adapter 5A10H43623 Delta ADP-45DW BA 20V2.25A adapter...

  • Page 70: Screws

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual Screws Table 10. Parts list—Screws CRU ID. SCREW L MM1.98D3LK4.5DNINL0.4T 5S10K25435 SCREW L MM2D5LK4.6D ZKNL CR3+ 5S10K25418 ViennaSCREW M M3.0D3.0L K 4.0D0.4T 90204955 Screw L Y700-15ACZ Hinge 3 5S10K26863...

  • Page 71: Power Cords

    Lenovo ideapad 100-14IBD Power cords A Lenovo power cord for a specific country or region is usually available only in that country or region: Table 11. Parts list—3-pin power cords Region CRU ID. CCC 3PIN 145000600 • LINETEK PC323+RVV300/300+LS15 1m Argentina 3PIN 145000599 • LINETEK LS15+H03VV-F+LP39 1m Danmark 3PIN 145000598 • LINETEK LS15+H03VV-F+LP-38 1m Switzerland 3PIN 145000597 • LINETEK LS15+H03VV-F+LP-37 1m Brazil 3PIN 145000596 • LINETEK LS15 H03VV-F LP26A 1m Israel 3PIN 145000595 • LINETEK LS15+H03VV-F+LP-41 1m UL 3PIN 145000594 • LINETEK LP-30B + SPT-2 + LS15 1m UK 3PIN 145000593 • LINETEK LP-61L+ H03VV-F+ LS15 1m...
  • Page 72 Lenovo ideapad 100-14IBD Hardware Maintenance Manual Table 11. Parts list—3-pin power cords (continued) Region CRU ID. Israel 3PIN 145000563 • Longwell LP-41+H03VV-F+LS-18 1m UL 3PIN 145000562 • Longwell LP-30B+SPT-2 18AWG+LS-18 1m UK 3PIN 145000561 • Longwell LP-61L+H03VV-F+LS-18 1m Indian 3PIN 145000560 • Longwell LP-67+BIS+LS-18 1m Italy 3PIN 145000559 • Longwell LP-22+H03VV-F+LS-18 1m Korea 3PIN 145000558 • Longwell LP-486+KTLH03VV-F+LS-5 1m Australia 3PIN 145000557 • Longwell LP-23A+LFC-3R+LS-18 1m Taiwan 3PIN 145000556 • Longwell LP-71+VCTF+LS-33 1m...
  • Page 73 Lenovo ideapad 100-14IBD Table 11. Parts list—3-pin power cords (continued) Region CRU ID. Israel 3PIN 145000526 • VOLEX SI16S3+H03VV-F+VAC5S 1m CE 3PIN 145000525 • VOLEX M2511+HO3VV-F+VAC5S 1m 145500000 • lux 0031+H03VV-F 0.75/3C+0011 1m Europe 145500001 • lux 0033+H03VV-F 0.75/3C+0011 1m 145500002 • lux 0014+SPT-2 60°C 18/3C+0016 1m Thailand 5L60J33143 • lux 0014+H03VV-F 0.75/3C+0011 1m China 145500003 • lux 0036+RVV 300/300 0.75/3C+0002 1m Indian 145500004 • lux 0046+IS694 0.75/3C+0011 1m Japan 145500005 • lux 0018(E)+VCTF 0.75/3C+0021 1m Australia 145500006 • lux 0038+H03VV-F 0.75/3C+0011 1m...

  • Page 74: Notices

    Lenovo ideapad 100-14IBD Hardware Maintenance Manual Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the...

  • Page 75: Trademarks

    Notices Trademarks The following terms are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. Lenovo OneKey ideapad Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company, products, or service names may be trademarks or service marks of others.

This manual is also suitable for:

Ideapad 100-14ibd

Table of Contents