Bistos BT-740 Operation Manual page 40

BT-740 Operation manual
Touch Volume
4.
Select 【Volume】smart hotkey → "Volume Setup" menu.

Select "Touch Volume": Set touch volume from 0 to 9. 0 means off.

Key Volume
5.
Select 【Volume】smart hotkey → "Volume Setup" menu.

Select "Key Volume": Set key volume from 0 to 9. 0 means off.

3.7.5 Setting parameter unit
You can select a preferred unit through the following operations
Select [Settings]Smart Hotkey or press

"Settings".
Select "User Maintenance >>" → enter the password and confirm →"User Maintenance"

menu.
Select "Unit Setup >>" →"Unit Setup" menu.

Select "Height Unit", and select the unit "cm" / "inch" as needed.

Select "Weight Unit", and select the unit "kg" / "lb" as needed.

"ST Unit" fixed as "mV", is not optional.

Select "Pressure Unit", and select the unit "mmHg" / "kPa" as needed.

Select"CO Unit", and select the unit "mmHg"/"kPa"/"%" as needed.

2
Select "TEMP Unit", and select the unit "℃" / "℉"as needed.

P/N : 740-ENG-OPM-EUR-D03
[Setting] key on the monitor panel →
Bistos Co., Ltd.
39
2018.05