KidKraft BROOKRIDGE CLIMBING FRAME Installation And Operating Instructions Manual page 19

Step 6: Monkey Rail Assembly
Pre-drill all pilot holes using a 1/8" drill bit before installing wood screws.
A: Insert 3 (1578) 1-1/8 x 15-7/8" Dowels into both (1943) MK Rail Long and (1565) MK Rail Short as shown in
fig. 6.1. Note that (1943) MK Rail Long will connect to the (1931) Post when attaching to the fort and (1565) MK
Rail Short will connect to (1936) MK Mount and the pilot holes on the (1943) MK Rail Long are on the bottom of the
board.
1"
Shorter rail
connects to
the MK Mount
Longer rail
connects to
the Fort Post
15"
B: Make sure shoulder of dowel is against
each rail before pre-drilling pilot holes. Drill
1/8" pilot holes through the rails and into the
dowels to prevent splitting. (fig. 6.2)
Fig. 6.3
C: Attach (1578) 1-1/8 x 15-7/8" Dowels to both rails with 2 (S3) #8 x 2-1/2" Wood Screws per dowel. Screws are
installed from the bottom of the board on the (1943) MK Rail Long (fig. 6.3)
Wood Parts
3 x Tennon Dowel 1-1/8 x 15-7/8"
1578
1 x MK Rail Long 2 x 4 x 54"
1943
1 x MK Rail Short 2 x 4 x 50"
1565
Note: Pilot holes
1565
at top of board
11"
1578
1578
1578
S3
Hardware
6 x #8 x 2-1/2" Wood Screw
S3
19
Fig. 6.1
1578
1943
Note: Pilot holes at
bottom of this rail
Fig. 6.2
1565
1578
1943
europecustomerservice@kidkraft.com