Table of Contents
Advertisement
How to Use
1
Open the lid and fill with
water.
Opening the lid
• Press the lid release
button. (If the lid
button is not pressed
completely, the lid
may not be opened.)
①
②
Pour in water
with another
container!
• Maximum 1.2 L
Adjusting the length of the power cord
* Wind the power
cord on the
bottom of the
power base
to adjust the
length.
EN10
2
Close the lid, put the
machine on the power base
and insert the power plug.
Closing the lid
• Close the
lid firmly as
illustrated until
you hear a
click.
①
③
②
Note
• Do not insert the power plug before
filling the water and closing the lid.
* Pass the power cord out through the
the position of opening.
)
(
Do not put the power base on the
power cord.
3
Turn on the power switch.
(Press to " ")
Start boiling the
water.
(
)
Power indicator
lights up.
Red indication
During use, the power
indicator lights up.
When the water has boiled, the power
(
)
switch turns off automatically.
The machine takes around 5 minutes
to boil. Water temperature 23 °C, room
temperature 23 °C, water to max level,
220 V.
• To stop boiling before the
water has boiled, turn off
the power switch.
Note
• Immediately after the water has boiled, do
not force the machine to continue heating
the water by keep pressing the power
switch. (It may cause malfunction.)
Empty-use prevention function
When the power switch is on without water, an empty-use prevention function works to
automatically turn off the power in order to prevent accidents and malfunction due to
overheating.
① Allow the body to cool sufficiently.
② Remove the body from the power base and fill the water.
③ Place it on the power base and turn on the power switch again.
* If you boil the machine without water, it may smell strange.
4
Remove from the power
base and pour.
■ After use, pour out any remaining
water.
* Keep the lid closed when pouring
away the water.
EN11
Advertisement
Table of Contents
